I have one of the brush bars from Guido Salvage. It is a Commercial Bow Bar 20 X 7 1/2 with a medium Stihl mount and the number 620...
Put a Dolmar PS-421 spike on it and leave the 5105 dogs on the shelf
I have a Zenoah G62 model airplane engine based on the 621 chainsaw engine. They come with a HDA48 (15.8mm) from the factory.
I have two 025's and one MS250. No primer bulbs.
They have WT-215 Walbro0 carbs and muffler mods
16" X .325 X .063 Stihl RSC chains
Run very good.
Ahlborn Equipment? Alborn Supply is a landscape company in Toms River, NJ.
If you don't need a cylinder, a flat top 353 piston would give it a pretty good power boost.
There's a reason the original cylinder is scored....
The spring is retained by a screw.
Reach down through the spring with a hex key wrench to remove the screw.
The Polymid plastic retainers will eventually break from heat etc. The plastic type retainers are considered better?
However, the retainer...
Mine came from the factory with a 15" .325 X .058 B&C with a 8 pin rim
I changed to a 3/8" 7 pin rim and a 16" Power Match K095 X .050" bar and...
I'm well beyond 47 and the "Who turned out the lights?" syndrome.
Now it's hard to feel things with your fingers or get them to move like you...
I've got a couple of those HD filter kits. So far - no problems.
Had a operator used to a 6800i tried to twist the 7900 choke lever and off it...
I would replace it with a 545 cover
The button goes towards the lever
You cannot get Stihl on line.
There are 7 Stihl dealers within 20 mi of my house and 3 within 5 miles.
You have to go to the dealer to get a new...
I have three of this family of Stihl.
The impulse line connects to a nipple on the base of the cylinder and goes through a hole in the plastic...
115i vrs 550XP?
The 115i is a favorite in the woods but getting beyond old friends, the 550XP has a lot more power and rpm and weighs less.
I've always liked the idea of a 420 but a friend was telling me that the 550XP doesn't weigh any more and has a lot more power.
Is that your...
I bought a new loop of RS the other day and I noticed the hook angle was really sharp. It is certainly not the common 60 degrees.
As sharp as it...
I have a 1997 one and the brake has always worked fine and never any problem.
The 109, 110, 111, & 115 are all the same family of saws.
One thing about hair - You guys had it when it counted and you needed it?
Separate names with a comma.