I've cut more small trees with a bar two or three times what was required :p
This was 38"dbh with a 45cc saw. (posted before)
I don't think...
You can find an 05x in the same price range.
More cubes= better for milling.
Not a bad idea to find an old saw just for milling.
Be aware that...
You could replace the dog with a plate that takes it’s place but does not protrude into bar area.
When ordering a bar....Keep in mind with the 3120xp, the outer felling Dog is integrated into the clutch cover/bars nut "pad".
You can't just...
I’m liking m-tronic a lot.
Where is the big displacement at saw for milling?
Sick of tuning milling the saw. Pia!
Tried 661... not big enough.
David sold me a saw and followed up with some questions I had re: an old recoil.
Later he sent me a brand new recoil/cover just in case.... saw...
Hang tough Bill.... everyone is a critic!
Do you use the same grease for the clutch bearing as the sprocket tip ?
I use the blue stuff from Oregon that comes in that tube made for the...
Granbergs quality is far from perfect or even ideal. I have trouble with the round rail clamps being too soft and requiring a screwdriver to open...
I wrote he thought they were nearly Ideal not nearly identical ;)
Yeah... I don’t have one :p
Doesn’t Brad Snelling have a thread on both of these saws (462/500i) ?
I recall he thought both stock were near ideal.
Pass the Ragu and parm!
Bugs like to hang out under bark as it loosens up while drying.
Remove the bark and you remove that habitat.
Seems like the 462 is an evolution of the 441c rather than 461.
The air filtration, the m-tronics, av's etc. (Displacement = more like461.... ok...
Get a straight edge up on that puppy and see where the problem really is.
It’s probably tension in the plank.
If it is you can try and weight it...
Lo0k at those numbers. E-free and reasonably cheap!
Lucky you all.
Veggie oil is cheapest and works great.
It melts the sap and all blends together.
I use it to clean sap off my cars then wash all the mess with...
Yeah jeebuz ... risky bizo messing with both a mans daughter and his power tools!
You crazy mang!
Separate names with a comma.