Navistar tape on the box and everything.
IHgascap.com less than 10 days, they are here.
Sad to see in a way. First silo was a pile, then they put it it in a ditch, then we had silos made of wood, concrete and then steel. Now we put it...
check to see if the pulse line is on the crankcase
When I'm done screwing around with new fangled gadgets. 041 riding shotgun on a 52 DC Case.
You have the 041 sit in a snow bank for like a half hour while moving brush from tops and never have to choke it, now it's like a 2 minute pow-wow...
As a child I never was cold when Father went to the woods with A horse and the 041.
When all else fails.
5100 is bad for flooding when warm I've found.
Compaction is getting them, not so much the rigs but the trucks used to haul it off.
The basic TO 35 design has been made all over the world, a TAFE may be a decent unit from India based on it.
TO 35 with the 2 stage clutch is nice for mowing, not 4wd. The newer versions with the 3 cylinder Perkins have very good parts support.
Crank seals are kinda special for them and antivibe mounts can be hard to come by.
surpluscenter.com has motors with a tapered shaft you can put a wheel hub on....
Crossbow; 2,4d and diesel fuel; Tordon. Tordon has a dye but is most expensive, the other 2 you could add dye to and spot spray. The white pine...
656 has lighter rear end with mechanical brakes and TA.
Make up a 3000 psi gauge with a quick tip and test the 706 against the 656, might be the 706 was getting tired. You may look into a fatter...
Didn't they have a hub that went on in place of the flywheel to set points?
Same size is nice if you damage a few links on a longer chain you can remove a damaged section for a shorter bar. Less trouble than replacing a...
I have a collection of .325 095 mounts I thinking of using up. Since it's rim sprocket it could be changed.
Separate names with a comma.