I went over the chain today and reshaped the rakers.
Then I examined each one with a straight edge.
Some of them had very little...
Guilty on the flat rakers. I took 3 to 4 swipes off them before removing the chain from the saw to clean it.
Other than a couple of...
Well I cleaned everything up and reassembled the saw.
After seeing what the wood did in the heat after opening it up I'm moving on to newer wood....
Sorry guys- distracted by the Detwiler Fire- almost had to bug out.
I'll post a pic soon as I can.
I like your set up M&H, and that walnut!
Needle valve lever? I have 3 adjustment screws before getting into carb- low, high and idle.
" progressive raker " I think that might be the most overlooked yet important phrase in this whole game.
The chain is out of the box fresh. And...
I'm just getting around to milling up some pine I have on my property.
I put a new (bought 18 months ago) Woodland Pro rip chain on and it's not...
sixteenacrewood, did you sort this out?
I'm having the same problem with my DCS 6401 with the big bore kit. New carb, piston, ring, fuel lines,...
Man- I'm at wits end with this thing.
I have no top end power!
Rebuilt the carb- no help.
Put a new carb on- NO help!
I really don't think the...
Guess who's back?
I ran my saw on the mill last week.
Seemed to run pretty good but it still lacked some power.
I ran through 1 tank of gas on 5'...
I probably should.
I don't have a tach but I'm 25 miles from the nearest saw shop.
I'll give it a go in the morning.
Thanks for the help.
After setting the magneto gap to .012" I got my spark back.
It fired up but was a quick blast and quit like it was out of gas....
C3M (raised letters on one side)
DM 12B 67A (printed on the other)
romad10 the kit was marked RB-101. It was in a Zama bag so looks like a factory kit. Carb is Zama.
I'm guessing the welch plug is the elongated...
I'm looking for coil test and installation specs.
I've had this saw for 8 years now. 6 years ago I put the Bailey 7900 kit on it.
Recently I used...
Christmas in July ! Sanitary is the word that comes to mind.
So what kind of dogs do you have?
Ammonia fumed stools (oak & cedar).
Thanks for sharing. I've never seen one like it. I bet it would come in handy cutting door and window openings in log homes. Very ingenious...
Who do you guys use for credit card companies? Mine noticed an unusual charge, voided it and the card and called me. Didn't cost either of us a...
I like your rig. That is going to last a long time. As far as oil delivery couldn't you pressurize your oil tank with a Schrader valve, much like...
Separate names with a comma.