Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. LogSawyer74

    Dolmar 7900 questions

    I've got a 7900 that I built from a brand new 6400 using the OEM 79cc top end. Other than occasionally needing a little more from the oiler on a 32" bar, there is nothing I don't love about this saw. It's still pretty much mint, but I'd like to keep it for my fall firewood cutting season for...
  2. LogSawyer74

    Sold Stihl 461

    Very nice 461. Built this saw mostly by buying new oem parts in small batches at my local Stihl dealer over about ayear (not the most economical way to build a saw! Trust me!). But I enjoyed the project of acquiring all the parts and thoroughly enjoyed putting it together). Every single...
  3. LogSawyer74

    DIY carb pressure tester

    Check out my pressure tester! Every single part made in USA. Cobbled together by yours truly. Works awesome
  4. LogSawyer74

    Want to Buy 3/8 .050 ripping chain

    Anyone have a bulk roll of ripping chain? I'd like to buy 2 loops of 3/8 0.50 gauge 93 DL of good quality ripping chain, anyone have spare they would spin together and sell? thanks
  5. LogSawyer74

    Stihl 361 tuning

    I'm pretty good at saw tuning. I know exactly what 4 stroking sounds like, and tune to clean up totally under moderate load. My 036, MS360, MS260 and dolmar saws are very easy to tune, really easy to hear it 4 stroke. I've been building lots of 361s lately, and I've found it difficult to tune...
  6. LogSawyer74

    Want to Buy Stihl 461 small parts

    Looking for 461 small parts like brake linkage, spring, brake band, intake boot, clamp, carb, clutch, drum, etc. thanks
  7. LogSawyer74

    Want to Buy Looking for Stihl 026 NOS cases

    I know it's like a needle in a haystack, but would like to purchase new old stock 026 (not 260) crankcases. I just missed 3 or 4 sets that sold on eBay a few months ago, hoping maybe they're still around somewhere. I've been stockpiling NOS 026 parts for a shelf queen project, almost there...
  8. LogSawyer74

    Stihl 036/362 crank bearing

    My brother is in need of a bigger saw than he has... So I’m going to put together an 036 from my bin of parts. I’ve got several pairs of used 036 oem crank bearings, but after putting them in, they feel a bit rough. I’ve got a really good used pair of oem bearings out of a 362. They feel...
  9. LogSawyer74

    Why so difficult to tune a Stihl 361?

    Been running my 036/360s for years. Super easy to tune; easy to hear it 4 stroke when rich, not hard to get the L screw just perfect. Recently rebuilt a 361, tuning is giving me a headache. Hard to hear it 4 stroke, if I fatten it up enough to hear it well, but still clean up under heavy...
  10. LogSawyer74

    Want to Buy Zama carb rebuilt kit RB-31

    Anyone got one (genuine Zama)? Thanks
  11. LogSawyer74

    Beginning climber/saddle question

    Good morning everyone Interested in learning to climb. Been reading Tree Climber's Companion and going to just start out recreational climbing with very basic Ddrt system. My question is regarding what saddle to buy. I'm 6'7", so would any of you taller fellas have a saddle you'd recommend...
  12. LogSawyer74

    Stihl 361 Tecomec crankshaft

    Building a few 361s, need a couple crankshafts. Anyone have any experience with 361 Tecomec crankshafts recently? I know they used to be made in Italy, but recall reading something about manufacturing shifting to China. Just hoping for some feedback before buying 2 of them....
  13. LogSawyer74

    Sold Stihl 261/362 clutch cover

    Captive bar nut cover, prefer NOS or really clean. Thanks!
  14. LogSawyer74

    Stihl Quickstop tank question

    Bought a new OEM 361 tank off the Ebay. Just received it today, turns out it is a tank for a C-Q model (Quickstop; this model has an extra chain brake built into the rear handle of the saw). Is this tank specific to C-Q hardware? Can I use a regular trigger, throttle rod, grip cover, etc on...
  15. LogSawyer74

    Sold Stihl 462

    Brand new Stihl 462, never been fueled. Power head only $900, shipping on your dime. PayPal friends/family or pay the fee. Lightweight bar in pics not included.
  16. LogSawyer74

    Stihl 462 at the John Deere dealer

    Was just in our local JD/Stihl dealership and they’ve got about 3 saws in the whole place. Said they’re having trouble getting parts, saws, trimmers etc from Stihl. However, they did have a 462c sitting on the shelf. It’s the 1st 462 I’ve seen in person. I was impressed with how light it...
  17. LogSawyer74

    Stihl FS410av

    Anyone familiar with this older stihl brush cutter? I've been looking for a pro brush cutter for some time now. Considered a Stihl FS560 and Husqvarna 555fx, but the price on both is pretty high. I recently ran across an older Stihl FS410AV for sale, the powerhead looks like an 041. Anyone...
  18. LogSawyer74

    Husqvarna 346 question

    What crankcases are compatible with the 346xp? 353 possibly? Any others?
  19. LogSawyer74

    Want to Buy Looking for 026 parts saw

    Like to buy a fairly clean 026 for parts. Ideal saw would be complete with burnt up top end. Got a new oem top end, looking to put it to use. Can paypal, thanks!
  20. LogSawyer74

    Sold Husqvarna 20" Techlite bar

    Interested in trading a nearly new lightweight 20" Techlite bar (large mount Husqvarna) for a Stihl 20" bar in 3/8 0.063 gauge 72 links (large mount, i.e. ms361, 362, etc). Prefer a Tsumura or Sugihara lightweight bar in similar condition. I'll pay your shipping if your bar is nicer than...
Back
Top