Search results

Mark, I have a MacCat Super 16 AV model C5 38 EM and wondering if this is in the Mini Mac series. I think it has the original spark plug ( Jenn Feng 9111- 310002) and would like to know what the proper spark plug number is. Also how do I determine the year with the ser. No (091803) Thanks Tricky50

Mark, I have a McCulloch 605 and looking for a pull starter mechanism. What other models have the same starter? tricky

deprime, Thank you for the time you spent creating the page for the repair manuals. Your efforts are greatly appreciated. You just made my hobby a lot more enjoyable! Tricky50

Mark, I disconnected the coil and condenser and the points checked out okay. I will replace the condenser and see what happens. Thanks for the guidance. Rich

Mark, Per your suggestion, I checked the continuity of the points on my mini mac 10. There is continuity regardless if they are open or closed. Does that mean the coil or condenser is bad? Rich

ethar Thanks for the info, I'll look into it! Rich

joe The air gap for the coil was close enough to touch the flywheel and distorted both and the reason I replaced them. The flywheel key is okay and so are the points. I have the motor out of the case & bolted to a plate in a vise and pulled the starter to observe for a spark leak in a dark...

Mark, I just got a mini Mac 140 running & working on a 110. It's in excellent shape and probably frustrated several other people before they gave up on it. I don't have spark so I replaced the coil,condenser,flywheel & checked the points. The on & off switch is good and so is the spark plug. The...

joeymt33, Thank you for the decomp info. tricky

Mark, I just picked up a McCulloch 605 and don't have a manual with it. Do this saws hav a compression release switch some where? Thanks Tricky

Workshop, I had the same problem with the Mac 140 I have. Had to buy a parts saw from ebay to get the screw & fast idle device. The fast idle piece on my saw is metal. When you get one put thread lock on the screw to prevent it from vibrating out again. That includes the high and low set...

I have a question about McCulloch 110 carburetor. While cleaning and replacing the gaskets in the carb I noticed that the metal disk on the diaphragm was positioned towards the carb body. However, the McCulloch maintenance sheet shows the metal disk on the diaphragm toward the carb cover...

tricky50 I have a Mac 110 without spark. What is the most common problem for no spark? It was never apart so how do you check for proper timeing? They are a challenge to dismantle but fun! Tricky

I lost the idle speed screw and the low speed mixture screw for my like new saw. Can carb kits from other saws such as Poulan work on this saw? If possible please guide me to a supplier for my problem. Tricky50