Search results

eastern hemlock

first one looks like basswood to me.

Port Severn is the closest

haha i use the trays...never tried the cups.

Burn pine all the time. probably makes 25% of my wood pile some years. Chimney is cleaned every other year and always told it looks good.

When in netruel or center position the engine does load up. Sorry if I didn't make that clear. It loads up and the pressure regulator acts as the return..... So I am going to get a new valve and go from there. Thanks for all the help so far :)

Yea think I'll start with a valve and go from there. Direct drive to the pump is an idea I thought about but not sure the engine has enough power for that.

We operate it with 2 people most of the time one person always moving the ram in and out. Usually push the ram a little farther through the wood. Then a longer return stroke gives me time to grab more wood lol. And if I'm by my self I usually have a pile of wood right beside it so it's in...

When running and splitter valve is in center the engine loads up and pressure relief is used as the bypass from what I can tell.

Hi Guys. Grandfathers log splitter which I'm using more now. From what I understand he and a friend built it in the 70's. I put a new motor on it a few years back and everything does work. Just Im thinking I want to update it with some newer parts. Only major problem is I have a rope to hold...

Basswood for sure.

Id be interested. Not sure you would ship to Ontario Canada?

Im not an engineer or anything but would heat be an issue? rollers must generate more heat at high rpm that ball bearing due to increased weight and friction area?

that sounds like it could be a problem

the 028 super was my first saw, got it from my grandfather. I like it for those reasons alone. It pulls a .325 20" chain no problem. i did a complete rebuild on it a few years ago. i really like the series of saw so my next saw was the 038 super lol.

the oil pump is sandwiched between 2 rubber seals or bushings. The oil pump or rubber if not seated properly could leak. The tensioner cover is loose? i believe that holds it all tight together. Possibly the oil pump shaft is so worn oil is leaking by but i doubt that. also the saw will oil the...

i havent used any aftermarket handles or parts with my 038 super, however with other saws they are cheap and work....with a little tinkering. i bought a farmertec 660 handle and the trigger would turn the choke lever to the off position. figured it out. I mean if the engine is good on that 038 i...

made this arch a few years back. Needs to be atv trail accessible lol

i mill with my 064 and run a 32" bar with 3/8 skip chain. had no issues milling sugar maple aprox 24-28". Running skip chain the 8 pin rim i have on it is fine

i got an old red maple that has bark the same