Search results

Hi i have an 024AV (early type) that has stripped the gear on the pump piston "see photo's" my question is can i change and upgrade to a later pump, as I've been told that the part is no longer available for my pump.

I to have this pump ending 0400, mine has a damaged pump piston, can i upgrade to a later pump "

No not first time user, I have an 076aveq plus an 075ave both fully working and both we're mounted to my 48" mill. I acquired this 075ave under the guise of an 051ave and as a non runner. Whilst I could turn it over a could not get it passed tdc due to all the carbon at the top of the bore...

Hi guys, Stripped down my 075 to have a look at the flywheel key, wasn't sheared as suspected. so needed to investigate further, I have invested in a Stihl test set (cost me UK£100) but I think it will prove well worth it, I have tested the ignition armature and the readings are as stated in the...

Hi guys, Stripped down my 075 to have a look at the flywheel key, wasn't sheared as suspected. so needed to investigate further, I have invested in a Stihl test set (cost me £100) but I think it will prove well worth it, I have tested the ignition armature and the readings are as stated in the...

Hi Dave, I can't remember if I ask for these to be sent to my email address, having look at my emails can't see the user manual, would you be kind enough to send please [email protected] Thanks Waggle.

I thing that a decompression valve might be a good option. I'll also be looking at the flywheel key as well. I've fount a local supplier that still have these for about £25.00UK. So will order 1 from them.

No not checked that, will strip down the starter side and look. :clap:

Hi guys, been a while since I posted, I have been rebuilding my planking mill, this has 2 075av power heads fitted, the first was an easy rebuild just stripped cleaned and fitted new rings, crank seals and carb diaphragms, the 2nd more troublesome as a small m5 nut from the air intake assembly...

Hi guys, been a while since I posted, I have been rebuilding my planking mill, this has 2 075av power heads fitted, the first was an easy rebuild just stripped cleaned and fitted new rings, crank seals and carb diaphragms, the 2nd more troublesome as a small m5 nut from the air intake assembly...

What a superb idea, raided the fridge, stole the lid of the Wife's cream cakes, cut to the required sizes, PERFECT. I will use this in future. Thanks for the advice.

Morning guy's, has anybody any idea as to the air gap setting between the flywheel and ignition module for a Stihl 017 chainsaw, later model just prior to the MS170 saw. Any info please, thanks John.

That's a great looking saw. like me I don't see why we have to throw things away when they can easily be brought back to full working life, I have a good number of old Stihl machines and have rebuild most of my stock, I haven't found it to difficult to get spares, even for my oldest 07. the saw...

OEM parts, clutch drives ok, until engine speed deteriorates.

Just another point to mention the points can be totally replaced with an electronic module.

Hi Pete, the correct plug for the 08s is an NGK B6HS, these are readily available at all good spares shops and online for only a couple of quid, (incidentally have a read of this, it applies to all small bore engines (...

Hi guys. I have a sick 017 chainsaw fitted with a 12" bar and chain, originally the saw was down on power and very hard to start, so I replaced the barrel and piston, and fitted a serviced carb, now the saw start first time every time. However the saw is still low on power, stalls the chain...

Hi all, I'm looking for a replacement recoil starter for a stihl07s chainsaw that I've recently purchased, I intend to fully restore this. If any one has a recoil housing please send photo's and price's Regards John.