Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    Echo CS 3510

    I just realized the OEM chain is 57 drive links. This 56 seems to run good but I don't want to mess up the bar or sprocket on my new saw. Oregon makes this 91VXL in a 57 and I'm going to order a couple. My ? is should I not run this 56.
  2. B

    Echo CS 3510

    I picked up my CS 3510 yesterday, had the dealer swap out OEM chain for a Oregon 91vxl/56(yellow) chain. I put into 14" red oak log that was VERY wet. The saw cut this wet wood very fast I thought, six firewood lengths in about 5 min.maybe less. If I put too much pressure it would bog. As long...
  3. B

    New Bar/Chain for MS 251C

    The Sthil site says no longer available.
  4. B

    New Bar/Chain for MS 251C

    Would there be any advantage to converting over to a 3/8,50 bar and chain. This would require a different sprocket correct?
  5. B

    New Bar/Chain for MS 251C

    I want to get a new bar and chain for my 251C. Thinking of going with a 16" bar but unsure about a chain. Currently have a 26RM 68 on the 18" bar and it seems ok but that chain is no longer available. My dealer has the 26RS for a 16" bar. The only other option seems to be a RM3. I don't use my...
  6. B

    Echo CS 3510

    New 352
  7. B

    Echo CS 3510

    Anyone using this new model Echo 3510 ? What are your opinions ? I'm thinking of getting one but not many reviews as yet.
  8. B

    Aggressive Chain For CS3510

    Dose anyone make a replacement .050/3/8 chain that will fit the Echo CS 3510. I plan to buy one of these saws but would a more aggressive chain than the OEM.
  9. B

    Raker/Depth Gauge File

    I have a Granberg file guide and looking for recommendations for a flat or triangular file for the rakers.
  10. B

    Royobi

    Found a deal today on a Royobi 40v 14" battery saw for $40 looks and runs like new. I got it for small stuff/trail clearing etc. Should work well on back of atv and light for carrying long distances. Anyway the saw has a .043 kerf bar and I was wondering if anyone knows if I could put a .050...
  11. B

    Replacement Chain

    I didn't think about that, your likely correct.
  12. B

    Replacement Chain

    I have a chance to buy a Echo CS 310 for $75.00,needs a new chain. Looking for recommendations. Don't want a low profile,would prefer a more aggressive 14" chain.
  13. B

    Sthil MS251 C

    What would make my saw bog and chain stop part way thru cut. Starts and runs fine has new chain as well.
  14. B

    Want to Buy MS251C Sprocket Cover

    I'm converting my 251c to standard chain tensioner and need sprocket cover. Not sure exactly what cover I need. The #1701 for the MS251 only uses one bar stud. The #1704 for a MS250 should work right? It dose not have the plastic stud that goes into the hole in side plate. Seems like I read on...
  15. B

    Want to Buy MS251C Chain Tensioner

    Not sure exactly what cover I need. The #1701 for the MS251 only uses one bar stud. The #1704 for a MS250 should work right? It dose not have the plastic stud that goes into the hole in side plate. Seems like I read on here somewhere that a #1705 is the correct one also that one for a MS170...
  16. B

    Want to Buy MS251C Chain Tensioner

    Great, I will PM you my address.
  17. B

    Want to Buy MS251C Chain Tensioner

    OK let me know
  18. B

    Want to Buy MS251C Chain Tensioner

    I need the adjuster,a bar stud,two bar stud nuts and cover. My MS251c has the "easy adjuster" which I want to convert to the regular adjuster.
  19. B

    Want to Buy MS251C Chain Tensioner

    I'm looking for the required parts to convert my MS251C to std. tensioner.
Back
Top