Search results

I'm doing a 390 conversion on an 029 super. Is it worth it to pay extra for the pricier ones? Some of the cheap ones on ebay have some sketchy looking castings

Very nice for it's age, runs fantastic. Compression is 150. No bar. 125+ shipping

Please pm

Pm plz

pm please

Need the 2 nuts as well. Sprocket is a drum type. If the cover has those chip guards, need those as well. Thank you.

No luck finding an oem stihl 390 cylinder(other than 4-5 africans PM'ing me on here to scam me), so gotta use aftermarket. I'll be using a cross high comp piston and caber rings. It seems there are some pretty bad castings out there and I want to get a good cylinder for this build.

Not lookin for am, please pm me.

Need a known good carb for a 490.

Looking for oe stihl

Saved this decent 029 super off of some offerup dimwit who bought and sold small engine stuff. Didn't even have 2 stroke oil in the gas when I brought it home. Saw runs/ran great. I was in the process of removing the cylinder to decrease squish to .020ish(someone already removed the...

16"-20" used is fine

Parts in title need to be in decent shape, but not perfect. My collection is starting to exceed my storage, so this is probably getting sold. Some discoloring and wear is fine. The sprocket is the spur type. I also need a buffer for an 011avt, looks like this

Need that and if there's a fitting on the right hole going into the gas tank I need that fitting as well.

#16 and #17, also if you could let me know if the rubber faces the pawl or opposite that would help. Someone used a mint 045 for parts to get a clutch and some starter parts. Idiot. Need two of each, one is a rubber backed washer and the other seems to be a standard washer. (not positive, these...

#16 and #17, also if you could let me know if the rubber faces the pawl or opposite that would help. Someone used a mint 045 for parts to get a clutch and some starter parts. Idiot. Need two of each, one is a rubber backed washer and the other seems to be a standard washer. (not positive...

Oe or aftermarket, either is fine.

Fixing an ms460 that's been sitting at my bud's shop for years. Plenty of use but good shape. Itll run for a cpl seconds it gas is poured in the carb. Took readings on the coil, got 1.2ish on the primary and no reading from coil to plug. No change on the meter whatsoever. Tried the 200 and...

Need a good coil and flywheel /magneto. Need entire choke assbly

Need the plastic top cover w screws, muffler,muffler gasker, and mounting bolts. Pm please