Search results

Well I feel pretty stupid Figured it out and figured I post so no one makes the same stupid mistake I did Well I bought the triple wall duravent plus stainless chimney 5 3 ft pieces and a cap slightly used for 300$ The cap was missing the spark screen so I decided I have stainless steel...

I've been doing a lot of reading trying to figure out how to stop it and the latest thing I will try other than your advice is to start the fire in the far end opposite of loading door I've read these types of stoves like to burn the wood like a cigar start in at the far end and going to the...

Im having a problem with igniting the fire with out smoking out the house Too much ash in fire box? I've all ways closed the "coal" intake on the bottom door

Do you have the grate covers in your stove wood doctor?

Finally up and running How necessary aee the rocker grate covers to burn wood ? Got a good burn last nite Alot of fall through of little stuff and ash Maybe that stops this ?

Rustoleum engine enamel says its good for 2k Cleaned the glass with Rutland glass cleaner a nd it looks brand new I blasted it first with coal slang I am now looking for a oval to round adapter know where I can get a good quality one? Everything I find seems super cheap and no where local...

Thought I would update Stove all cleaned up and pad finished Just gotta get it inside and run a chimney now Gettin cold quick Lol Thanks guys

I'm currently trying to figure out my measurements and clearances for the installation in the corner it's a solid brick wall and have to 2" slate underneath The manual I found says I can get 12" from corners with a heat shield? Walls are solid brick 22" thick should be fun to punch through I...

Pretty nice now yours is the bigger one than mine and I saw a chart that says mine has more but output ? I live outside north of Philadelphia and single home built in 1835 17 wide 60 some long brick walls with plaster coat no wood plaster on brick Roughly 1100sq ft and I plan on this...

I found the post where u put up pics of yours but there broken links any chance I can take a look? This one has a bit of surface rust the wife thinks it's ugly so I have to pretty it up and prove her wrong it's going to be right in the corner of our living room so it has to look good

Thanks for the info I'll definitely make a new one I'm very mechanical and weld steel and even cast I'm going to be taking apart sand blasting and painting it put it back together redoing all the sealing gaskets and the sealing in the top What should I be using to seal the edges at the top I can...

Hi guys I just got a Dutchwest india 263476 I believe 25 1/2 wide at top Cleaned it up some everything moves everything needs new seals and thr back wall plate got some rot it looks like Can anyone look at the pics and tell me if I have everything or what I have and what I need first wood...