Search results

A face cord is 4 feet high by 8 feet long by the length of the wood(typically 16 to 18 inches). So basically it's a third of a cord. I would prefer to use the cord measurement as it's more precise but about 98% of people in western New York measure in face cords. Personally my face cords measure...

Thanks farmer steve! Where are you posting from?

Ok the best I found was ~14 facecords for 500 or 18-20 facecords for 700. Is there anybody from the area that can confirm if this is the going rate? Around 35 a facecord. It seems like a fair price.

Good idea, thanks.

Bumping just in case...

I don't really have a way to transport unfortunately. Ideally I would just have a large log load dropped off for me to cut up and split. Thank you for responding.

Hi, Does anyone know where I could find a fair price on a log load delivered to the LeRoy area and about how much I should be paying per facecord? Thanks

Cut some wood today. Best saw I've ever run.

I didn't use air compressor on carb fyi. I think she was gunked up.

Carb, I dunno. Filter clean, chains sharp

Well I bought a cheap carb on Amazon but when it came it said zama on one side and stihl on the other? Anyways I put it in last night, fired it up and voila, it idles now. Super stoked gonna do some cutting today. Thanks all for the help! Edit: oh yeah the thing only cost $13 lol

Uhhh I may have messed up. I watched a video of an 036 carb rebuild so I tried to make mine look like his, nice and shiny, scrape everything off. I thought the sticky gunk, amber in color needed to go because it was old gas remnants on top of (what I think is the)Welch plug. Did I destroy the...

Steve Sr and Cuinrearview thanks for ideas and all your help. I'm gonna tackle it this weekend and let you know how it goes. Bub - the first time doing it is difficult and time consuming but very rewarding!

It doesn't want to stay running with screw all the way in or all the way out maybe I'll try and clean the carb or get an aftermarket one? It seems to run great besides that... just won't idle and stalls out.

That screw did look like it was way out I'll give it a look later, thanks.

I'll mess with LA screw later. Hopefully that does it. I did not pressure test after putting back together didn't even think of it. Thanks for your help.

Yes in part throttle position. Then it will only stay going only if I rev it. Do I need to clean out some jets on the carburetor? Seems like it would need it after sitting 10 years. Everything I could see I cleaned but I'm reading there are more under the welch plug, in particular the idle jet...

Good news, I replaced everything we talked about and got it running. Bad news is it won't idle. I rebuilt the carb with that kit but is there something else I should do. I turned each screw one full turn. It starts when I put the on off lever all the way down then ot runs like a banshee. Then I...

Is this 46mm?