Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Tractorsaw1

    Want to Buy Wanted Stihl 038 & jonsered 2188/2094 parts

    Still need 2188 recoil, half wrap handle, & brake flag Would use 385/390 parts trade cash let me know
  2. Tractorsaw1

    parts saw Dolmar PS-7900 re-build

    ok great - No my old plastic part the shaft seemed pretty snug in there so I will put some oil in the new one & assemble it. Thanks for the help!
  3. Tractorsaw1

    parts saw Dolmar PS-7900 re-build

    I measured the new pin & its a 2mm pin so I picked up a 1/16" punch to drive it out - In the rebuild kit of parts - where does the ball bearing go in the oiler on reassembly?
  4. Tractorsaw1

    parts saw Dolmar PS-7900 re-build

    Ya I modified the socket to get clutch off, I am looking for a tiny nail or drill bit to nock out the oiler control bolt so i can replace it. I am going to see if anyone here at work has a pin that small
  5. Tractorsaw1

    parts saw Dolmar PS-7900 re-build

    What size punch do I need to knock out the control bolt retaining pin?
  6. Tractorsaw1

    parts saw Dolmar PS-7900 re-build

    When I ordered it said 5 in stock
  7. Tractorsaw1

    parts saw Dolmar PS-7900 re-build

    Ereplacement parts has new oiler drivers for $20
  8. Tractorsaw1

    Withdrawn Dolmar 7900 parts

    The drives I’ve found were with the pump for $70. I may order from chainsawr used
  9. Tractorsaw1

    Withdrawn Dolmar 7900 parts

    Yes cost shipped to 63351
  10. Tractorsaw1

    parts saw Dolmar PS-7900 re-build

    Looking for a 131 oil pump drive - what’s cost shipped to 63351
  11. Tractorsaw1

    Withdrawn Dolmar 7900 parts

    Looking to buy a new clutch and oiler drive worm. I have the oil pump rebuild kit but need the worm gear. Thanks for any help. Assuming someone online is selling new parts? Thanks
  12. Tractorsaw1

    Stihl 038AV non super, non Magnum - upgrade list?

    what carbs were on the Mag & super - seem to remember the bing was the hot ticket but thought kits were hard to come by?
  13. Tractorsaw1

    Want to Buy Wanted Stihl 038 & jonsered 2188/2094 parts

    I might - I have 2 & should purge 1. Let me get some pics Also looking for a Stihl 440 crank, aftermarket snapped off at the flywheel crap
  14. Tractorsaw1

    Want to Buy Wanted Stihl 038 & jonsered 2188/2094 parts

    Still need 2188 recoil, handle, clutch cover, brake flag
  15. Tractorsaw1

    Want to Buy Dolmar 6400-7900 crankcase

    Looking for a case with a bad crank. Have a solo crank to install. Let me know what you have & what you want. thanks!
  16. Tractorsaw1

    Dolmar 7900 porting

    7900 Ported is really something to experience
  17. Tractorsaw1

    Want to Buy 346 xp oe cyl

    Well at $500 that’s a hard pass for me. You can get the NE for around $120 oem
  18. Tractorsaw1

    Want to Buy Partner 5000 plus

    I will take it - how much for shipping to mid missouri?
  19. Tractorsaw1

    Want a 500i so built a 46

    Pretty sure I bought my 7900 online brand new shipped to me for $550 - I have built several 044 with the 046 top ends - great setup
Back
Top