Search results

Hello gents! I’ve got a dolmar 120si that I ported “freehand” meaning I widened out the lower transfers and raised the exhaust by one rings width and deleted the base gasket. It’s got .030” squish as well. It pulls a 24” bar very well. There is a space for an extra port on the other side of the...

Hello gents! Here’s another rebuild I’ve got sitting in my shop. No port work but it has a muffler mod and the 361 high jet installed in the carb. It’s got a new oil pump and gear, new crank seals, new clutch and clutch bell, carb clean and the high jet replaced. She cuts well. I don’t want to...

Hey out there! Any one have a decent husky 572 piston and cylinder? There is next to nothing out there parts wise. Thanks!!

Hello, I’ve got a dolmar 120si that I’m going to part out because I’m tired of it laying around my shop. It does run. But it’s a finicky to start saw. It is complete with a full wrap I just bought. So if you need parts please let me k ow which ones and I’ll let ya know the price. Thanks gentlemen!

Hello gents! I’ve decided to part with my husky 359 that I ported personally . I can get you the numbers if you are interested. I have also done a custom exhaust with a 14 mm socket and a west coast saws exhaust deflector. It’s also got a base gasket delete. She’s a strong saw but I’ve got 4 60...

Hello everyone! I’ve got a 2172 that ate the clutch side bearing and damaged the bearing pocket I the case. It’s super hard to find a jred case to fit the 2172 let alone a husky one. So I was wondering g if you can grind down the xp case to work with the x torque cylinder? I am Pretty handy with...

Looking for a case set or a clutch side case half for a jonsey 2172 or a husky 372xt. mine got eaten up by the bearing. Thanks gentlemen

Hello! I’ve got an ms 460 that I recently rebuilt and did a small bit of Porting to( widened transfers and exhaust port). It’s got a highway pop up piston. With caber rings, oem crank seals, aftermarket 2 port muffler and a base gasket delete. It’s got really good compression and will only get...

Hello all! I thought I would try again at this…. Anyone have a pro Mac 850 cylinder for sale? I would like one that’s still got good plating. thanksguys! Andy

I know this is a tall order but I’m looking for a decent 850 cylinder. I would love to build up this 850 I’ve got sitting in a box.

Hello, ive got a burnt up problem child 562xp that I tried to do a mild port job on a Warhawk cylinder to and I have had nothing but problems with the thing. I’ve sunk way too much money into this thing and I’ve moved on. And it’s gotta go. so I am asking $200.00/OBO plus shipping to lower 48...

Hello all! I am doing my first port work on my trusty 562 Xp and am looking for advice from people who have ported 562s. when using my degree wheel I have come up with: exhaust 105 deg transfer 115 deg blowdown: 10 deg intake 73 deg. do these saws really run 10deg of blowdown? I was under the...

Hell y’all... I decided to try an easy first port job and got a little carried away I think. I’ve searched for pics of the port jobs on the lower transfers but vans find one suitable to help me figure out if I screwed up. I removed the covers and began to round the edges of the lower port...

Here’s another buried shop find I need to clear out. It’s a homelite 550. It needed the tank resealed and crank seals due to a leak. I resealed the tank but could not find the correct crank seals.i also found that the clutch is broken and will need at least the weights. If I remember correctly...

Hi, I’ve got an old husky 2100 cd that was my brother in laws. needless to say he let me have it When I couldn’t find a flywheel for it. I’m now finally getting around to cleaning out the shop after a few years. like I said, the flywheel Magnet came apart And it will idle but it can’t...

ive got a husky 2100 cd that idles well until you accelerate and then it misfires. I traced it to the flywheel magnets. They had come apart and I’m having trouble finding a flywheel.. I am tired of the thing sitting in my shop. So I am thinking of getting rid of it. is anyone interested in...

hello everyone. Clearing out my shop a bit more and I’ve got some NOS Makita parts. 1 x Loaded metal clutch cover for a 6401/21 7301 and 7901 $90.00 shipped. 2 x bare clutch covers got a 6401/21 7301 7901 $50.00 shipped each 1 x chain brake handle 6401/21 7301 7901 $45.00 shipped 2 x chip...

I’ve got an echo short block sitting around. It’s for pb 250/252 series and the es250 series.i have the exhaust gasket and the box it came in. Never been mounted or used. Asking $70.00 plus shipping

Hi I’ve got a power cut 20” Stihl bar new in its sleeve. It is not the small mount stihl. It is the 12.1 mount. I bought it for a customers 291.I would like to get rid of it super cheap. I’ll let if go for... SOLD Thanks, Andy

hello peoples, I closed my repair shop and have some chain sitting around. It is all Oregon chain sitting in rolls and would like to split in to chains. I’ve got: 72 lgx 72 link chains $18.00 84 link chains $22.00 105 linkchains 25.00 Plus shipping of course 72 cj and ck square ground chain...