Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    Husqvarna 444SG Restoration

    This is a duplicate of my earlier thread. @pioneerguy600 can you delete this thread?
  2. S

    Husqvarna 444SG Restoration

    I got this saw about a year ago with the intention of restoring it to nice condition. I thought I would do a thread about the process and post a lot of pics with the idea that anyone in the future with one of these saw would have a good reference for wire routing and assembly. This saw was built...
  3. S

    Sold Looking for 254/262xp Crankcase

    I am looking for for an early 154se/254/262xp crankcase. I need the pto side but will take a whole crankcase if you don't want to split it. Must be in good condition with no cracks, breaks, stripped threads or rot. Nothing newer than 1992 please. Thanks, Chris
  4. S

    Want to Buy Looking for Early Husqvarna 357xp Piston

    As the title says, I'm looking for a piston for an early 357xp. They used a narrower connecting rod/bearing in the early saws so the distance between the piston bosses is narrower (approx. 14mm). The later saws used a piston with approx. 15.5mm between the bosses. Anybody got anything before I...
  5. S

    Want to Buy Orange Top Cover for Husqvarna 44 or 444

    Like the title says, I'm looking for a top cover that isn't held together with roofing tin and pop rivets. Chris
  6. S

    Want to Buy Husqvarna 254/55 Brake Flag

    I'm looking for a NOS or mint old style brake flag for a Husky 254xp. Husky 55 uses the same flag. It should look like this: Thanks, Chris
  7. S

    Want to Buy 268XP Piston

    Looking for a good 50mm windowed piston for my 268xp. Good/new oem or new Meteor sized 'A' or 'AB' Thanks, Chris
  8. S

    Want to Buy Husqvarna 254 Piston w/Ring

    I am rebuilding a Husky 154se and it has a nice cylinder but it has the full skirt piston and I would like to switch to the open style piston. So I'm looking for very good used, or brand new piston 45mm with ring and pin. The only caveat is, it must be a 'C' sized piston to match the cylinder...
  9. S

    Want to Buy Husqvarna 154/254 Starter

    I'm looking for a nice older style recoil/starter for a Husky 154 or 254. Can be complete starter or just the cover. The decal doesn't matter but the rest of the housing must have good appearance - definitely no cracks or gouges - that's what I have already. Here is the style I am looking for...
  10. S

    Want to Buy Husqvarna 254 Top Cover

    I am looking for a nice used or NOS top cover for a 254xp. I just picked up a saw and want to get it looking nice again. Thanks, Chris
  11. S

    Husqvarna 55 Special Pro

    Has anyone ever heard of a Husky 55 Special Pro? This is the second one I have seen pop up in the classifieds in the past few weeks. The first time I saw it I simply passed it off as someone's over-active imagination. But now I have seen it again and wonder if there is more to it? Is that decal...
  12. S

    Want to Buy 262XP Muffler Support Bracket

    I am looking for 1 or 2 muffler support brackets for a 262XP. It must be the 4 bolt style like in the pick below. Thanks, Chris
  13. S

    Want to Buy HS228

    Looking for a good Tillotson HS228 carburetor that doesn't have a sloppy throttle shaft. Might even take 2 of them. Thanks, Chris
  14. S

    Happy New Year!

    Happy New Year to all you chainsaw nuts. May all your chainsaw dreams come true in the coming year :cheers::drinking::dizzy:
  15. S

    Vintage Saw I.D.

    Can anyone identify this saw?
  16. S

    What's up with Arboristsite?

    Am I the only one that is having lots of trouble logging in and navigating this site? When I do finally get logged in, it can take 30 seconds to load a page, or even to just "like" a post! Was there a recent "upgrade" to the site and this is the new improved version? Did the site owners...
  17. S

    Rattle Can Paint Advice

    I painted a case half on my 288xp today. I used Husqvarna orange rattle can paint and it turned out pretty good. I baked it in the oven (wife was away lol) at 180 degrees for 1 hour and it came out smooth and shiny. The only thing is, I think it would look even better with a second coat, and...
  18. S

    Want to Buy Pioneer P50 Parts

    I am looking for a felling dawg/spike, a lower rear hand guard (it's plastic and bolts to the bottom/side of the rear handle), and a top filter cover. I'm thinking parts from the P50, P51, P52, P60, P61, P62 are interchangeable. Here is a couple pics for reference.
  19. S

    One Oh Oh Oh

    It's been a tough, close race, but I think I am going to beat @Huskybill to the 1000 posts mark. :muscle::givebeer: :dancing:
  20. S

    Sold 288xp Clutch Cover (Found it)

    I picked up a 288xp that has suffered from some abuse, so I am looking to purchase a replacement for this clutch cover that has seen better days.
Back
Top