Search results

Ok, so I bought this saw for $450 and then I kind of went nuts with buying NOS/OEM parts for it; see list below. It has the original piston and jug; both were very nice, so I just installed some Caber rings and called it good. It also has a rebuilt carb, new fuel lines, unlimited coil, etc. It...

I got the saw as a non-runner. I gave it a partial disassembly and a full cleaning, fixed several minor issues, rebuilt the carburetor, swapped in another ignition trigger, and now she's a runner. Idles at right around 2k, as it should, and tops out just shy of 10k rpm, but tuned a bit rich so...

I'm looking for an 064 flywheel with two keyways - it would be 1122 400 1201, 1122 400 1203, and maybe 1122 400 1204. Again, it has to have two keyways, or it won't work for me. Thanks, Scott

Ok, so I picked up a complete 064 for short money a year or so ago. I don't know if it was running or not when I got it and like a dummy, I didn't check for spark before tearing it down. Serial number is 123965831; believe it to be manufactured in 1991, give or take a year. I went through the...

So, I'm thinking about buying a non-running D7D 17A project; should be about 1959 vintge. It's complete, said to have been running (but not running well) about 10 years ago. Owner thinks it's was having fuel issues. It has a hydraulic blade, electric start, Hyster D7D winch. Engine is a 4...

Very nice low-hour 070 for sale. Was purchased for one job and then put in storage. I'm the second owner. I rebuilt the carb, swapped to electronic ignition (original points ignition included) and got it all cleaned up. Comes with 36" bar and new .404" chain. Runs, cuts, and oils great. No...

Here's the link -

The Jonsereds 62 is a 56cc saw made for only two years - 1969-1970. This saw is the predecessor to the 621, and they seem to be fairly rare, especially compared to the 621. I sourced this one when I was living in Italy; I believe it came from my friend Niklas in rural northern Sweden, but I'm...

Still cleaning out the garage; here's another saw that I bought out of rural northern Sweden when I was living in Italy. Jonsereds 601, 56cc, produced 1969-1972, serial number 209229. Has the cool looking clutch cover that looks like it was inspired by a C1 Corvette. According to my notes, the...

Jonsereds Raket XF for sale - I think it has everything to complete it but not positive. If not, I do have plenty of spares. Comes with a correct roller tip bar, but the roller tip needs to be re-assembled and riveted back on. Not sure on spark and don't recall if I checked compression, but...

Cleaning out the garage! Here's another saw that's been sitting on the shelf that I haven't gotten to, so time to send it down the road! It's a nice Jonsereds 601, 150 psi compression but no spark. I tested it with another coil and got spark, so a new coil should fix it. The coil from a 621...

041 is pretty clean, has spark and good compression, but needs fuel lines and a carb rebuild. Comes with a NOS rear handle and NOS points. $80 + shipping, PHO.

Not interested in Chinese knockoffs, just nice used OEM or NOS - part number 1125 350 0818. If I can't find an original 036 tank, I'l consider an MS360 with flippy caps.

I have a nice 036 Pro that is one of my go-to saws and the tank sprung a leak. Must have taken a hit during the move from VA to TX, and it's cracked. I really don't want to put a Chinese tank on this saw, but that's what I'm seeing available, and most with flippy caps, too. Anyone know where I...

Selling my restored 1966 Fairlane convertible - rebuilt drivetrain (428, toploader 4 sp, 9"), fresh paint, new interior, new wheels and tires, etc, etc. Only selling because I just retired after 26 years in the Army and I need the funds to start a business. Currently on eBay with No Reserve...

So I recently did a complete rebuild on a Stihl Contra and it won't start. It has great spark but seems to flood really easily. I spent a few minutes trying to start it, pulling the plug out, drying it off, etc, and when I was done trying and going to put it up, about 1/4 cup of fuel poured...

My '87 F350 project is now for sale on eBay with No Reserve. Here's the link in case anyone is interested - https://www.ebay.com/itm/325687885812 I have a lot of $ and time invested in the truck; someone is going to get one hell of a deal. Here's why I'm selling - Thanks, Scott

This popped up on FB MP for $600 then dropped to $450. I picked it up for $400. Have wanted one for quite some time now to fill the gap between the 044 and the 075. S/N appears to be 123965831. Anyway, it's a runner. Saw has seen some use, but tank looks good and the case doesn't have any...

Fellas - I have 3 loops of 7/16 chain. What's the going rate on it? I have no clue what to ask for it. FYI - it's all used, but has some life left. Scott

I'm selling a complete XD + a parts saw if anyone is interested. Link - https://www.ebay.com/itm/325175879905