Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Walter Glover

    Farmertec 066 problems.

    Built a 660 kit saw from Farmertec and I have a great running saw. Built a 380 and a 372xp love both of them. Might be frustrating if you don’t know how to fix em!
  2. Walter Glover

    Chainsaw Dyno bring saws to there knees. Build from start to end with video

    Got it back together and did a couple runs with my 372xp kit saw. Could only get 2.85hp out of it. Best it did was 7.5 pounds torque on dyno at 2000 rpm thinking my force measurement needs help. Onwards.....,
  3. Walter Glover

    Chainsaw Dyno bring saws to there knees. Build from start to end with video

    Worked on it some more this aft. went with a hydraulic force sensor Made bushings to align saw in bar mount Made a knob to fine adjust brake caliber lever Will do some runs tomorrow if all goes well
  4. Walter Glover

    Chainsaw Dyno bring saws to there knees. Build from start to end with video

    Progress today. Finished the mechanical bits and gave it a run. Many issues reared up that need fixing.
  5. Walter Glover

    McCulloch Chain Saws

    Measured piston 1.8350” just below ring 1.8365” skirt So proper it would seem for the NOT 1.850” Mcculloch cylinder. Grrrrrrr
  6. Walter Glover

    McCulloch Chain Saws

    Would anyone know the actual bore size for the 610? The 47mm piston I bought from Chainswr is 0.018” undersize for 47mm at 46.5mm Grrrrrrrr
  7. Walter Glover

    McCulloch Chain Saws

    Hi fellas anyone here deal with Chainswr.com? Does he reply to contact request? Cheers
  8. Walter Glover

    McCulloch Chain Saws

    New plan for cylinder liner in the pro Mac 60 cylinder for a CT70 Honda will become a liner
  9. Walter Glover

    McCulloch Chain Saws

    Was playing in the trees on the weekend. Took the cp70 and pm81 our. Both ran for a short time then took to flooding the 81 so bad fuel heard boiling inside engine then once cool wet at exhaust. Any tips on how a good run can go south so quick? Will open up the carbs ASAP but wonder what to look for
  10. Walter Glover

    Pioneer chainsaws

    Took the P51 out into the trees where she belongs, did we have fun or what! Blocked up a solid 70 ft worth of windfall spruce. Above flare it was 24" and gave me 6 full loads in my Teryx sxs. Fun for sure
  11. Walter Glover

    McCulloch Chain Saws

    2broke, would it be possible to use a smaller oring stretched over the piston to achieve less friction?
  12. Walter Glover

    Homelite Chainsaws

    Put them on a saw one component at a time. Test them that way.
  13. Walter Glover

    Husqvarna Sticky!

    Thanks ML, this 181 starts hard in the cold and would be easier on this ole back if it fired easy. Will report on the project
  14. Walter Glover

    Pioneer chainsaws

    Fellas any suggestions on where to find a complete clutch cover with brake for a P51?
  15. Walter Glover

    Husqvarna Sticky!

    Ordered up the parts to build the 181se into 288xp ish. Will really appreciate the addition of the decomp lol.
  16. Walter Glover

    Husqvarna Sticky!

    Love that big ole saw!!! Gonna put that p&c on my 181! Maybe crack the oil cap loose while milling to see if she oils better?
  17. Walter Glover

    McCulloch Chain Saws

    PM saws vibration isolation added weight? Spose so the weight of the 55 I have is indeed nice but that muffler is brutal!!!! oh yes btw the 55 and 60 cylinders I have are aluminum plated not iron linered
  18. Walter Glover

    McCulloch Chain Saws

    Chainswr had the piston and cheap at the time iirc $19.10usd Thank you it has me sweating whenever I think about it lol
  19. Walter Glover

    McCulloch Chain Saws

    Yes I believe that to be a worthy approach. Piston from a 610 and a diy cast iron sleeve in a shrink fit to cylinder
Back
Top