Search results

Thanks Brian

Thanks for the input guys, off hand does anyone know what size the fuel line is on the 10-10? Inner diameter specifically, the barb on the carb is large as y’all all know

Hey guys, I am so close to firing up my 10-10 and I am in need of advice. Pulled the NOS fuel line from the tank so that I could wrap the line with Teflon where it seals the gas tank from the air box side. Well the fuel line tore in multiple places when I pulled it from the tank. You guys that...

Hey guys, so I was removing the fuel line from my 10-10 so I could wrap it with Teflon and reinstall but low and behold the line tore. I was watching videos from the chainsaw guy on YouTube and he used to sell a kit with a line, grommet and filter. This video is from a few years back and the...

Hey guys, quick question, got the 10-10 fuel tank to seal but now having fuel leak through where the fuel line comes through into the air box. Tried weatherstripping adhesive since i am adhering rubber to metal but the fuel ate it away. Any ideas guys on what kind of adhesive will work? Any...

I put a few bids in on that handle, can’t believe the price but being that it’s from mcculloch NOS...as rare as they are I can see it going that high

Hey guys so I’ve been thinking ever since I posted about sticking with a 40:1 mix for my Mac I realized I never got yall’s feedback on what the best two stroke brand of oil is. What do y’all recommend? Money is not a factor, I want to use the best in my saws so that they last a good long while...

Thanks ron and mark for the input, I’ll let y’all know how it turns out. Scott

He doesn't stock full skip semi chisel chain, it's just not purchased in high enough numbers to justify it being stocked. I get it, just makes me wait a little longer ;). Thanks for replying back jethro, does anyone else know how many drive teeth are on a 28" chain - 3/8 pitch?

Thanks for the feedback guys on ratio mixing, I’m going to stick to a 40:1 mix. Another question, I know I ask quite a bit, does anyone know how many drive teeth are on a 28” chain 3/8 pitch? My local saw shop dealer says he needs to know so he can order the chain.

Thanks for the reply Jethro, but the Opti-2 is a universal mix meant to be used in any two stroke application regardless of what ratio is required. It's a "one mix fits all". I can't mix it 40:1, if you are interested in what the mix has to offer head to Opti fuels website and check it out. It...

Hey guys, sorry to bother y'all with the same question but has anyone run Opti-2 two stroke mix in their Macs? It's a universal mix with no specific ratio to mix to. Just curious to see if I should run it or stick with a certain fuel mixture. Thanks for your time guys. Scott

Hey guys hope everyone is doing alright. I’m not sure if it has been covered before but has anyone tried using the opti 2 two stroke mix on their macs? It states no ratio mixing required, but that it’s a universal mix. Just wondering if I should try it after working long hours to get the pro Mac...

Hey Pogo, Sorry I asked you again...I didn't see the reply you sent this morning. Thanks for getting back to me, I have been trying to get sugar creek to make decals for my 10-10 for about a year now. I knew he was busy based on the amount of time it took to get an email response back and I...

Hey Pogo, the decals look awesome. Who made them for you?

Hey pogo, who made the decals for you?

Hey guys it has been quite a while. Finally had the 10-10 back together and encountered some leaks from the front of the fuel tank and where the fuel line comes through the tank into the air box. Re-applied gasket sealer to the front of the tank, need to research a good sealant to use for the...

The wire itself is good, but doesn’t hurt to recheck it, thanks for the input Scott

I know it's been a few days Mark but I'll try bending the brass contact and see how that turns out. Scott

Alright fellas, I'm getting really close to firing the 10-10 and yet another question arises. I pulled the spark plug and was checking for spark...all was good until I took the kill switch to the off position to check it and low and behold I am still getting a spark. Does anyone mind explaining...