Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    Husqvarna 359

    Hmm ok there seemed to be nothing wrong with the vent but I guess you never know. Just hate to drop another 10 bucks on a stupid vent that might not do anything
  2. B

    Husqvarna 359

    just tilted a little so it doesn't come out, there was only about 1/4 fuel left.
  3. B

    Husqvarna 359

    well i return.... it ran for a little then same problems. after f'ing with carb for a little i decided to try and run it with fuel cap off and guess what runs like a dream!!!! so i dont understand why the fuel vent didnt fix the issue. why does it run good with gas cap open? is it still running...
  4. B

    Husqvarna 359

    Ok guys I got the fuel vent in tonight threw it in there fired it up and it would idle then bog on throttle. Messed with low screw on wabro no luck then threw the zama back in with a little adjustments here and there seems to be running good! Didn’t run it that long once i adjusted it but engine...
  5. B

    Husqvarna 359

    I ordered a new fuel vent I believe that could be the problem. Everything else with it seems to be in order. There is no way I have to bad carbs. Will post back once I know if the fuel vent has fixed the issue.
  6. B

    Husqvarna 359

    zama came through ebay... I believe walbro carb has zero issues
  7. B

    Husqvarna 359

    I have checked muffler, vacuum and has a brand new carb boot. just pulled the fuel tank vent out and if memory serves me correct one time while cutting i opened the fuel tank cap to let air in and i believe it kept idling then died after a few second of closing the cap. so i think it could be...
  8. B

    Husqvarna 359

    Ok guys, so I know that there are a lot of threads out there about this piece of junk 359 but I have tried some of the fixes with no luck. I tore the saw all apart and checked piston and cylinder looks like new, compression at 140psi. I ordered all new intake bellows and etc. new zama carb and...
Back
Top