Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. m2theb

    Walbro WA Carb Problems

    nice work! great info to share
  2. m2theb

    "You Suck" Thread 2021"--Pics required!

    grabbed this 6401/21 last weekend for $20 seems the case is leaking lube at the split
  3. m2theb

    "You Suck" Thread 2021"--Pics required!

    Nice Score!
  4. m2theb

    "You Suck" Thread 2021"--Pics required!

    How’s that happen? And landing on $26
  5. m2theb

    Want to Buy 32" - 36" D033 or Equivalent Large Mount Dolmar

    I know it’s 4 years late, but I’m wondering if you still have the 20” and would still like to part with it?
  6. m2theb

    Sachs Dolmar Chainsaws Thread

    on my bench, 49 off a 9000
  7. m2theb

    stihl 290 acts like it is out of gas when the tip is pointed down

    i agree here, 9 years later. dealing with an 026 with a new oem fuel line, which is short and is stressed putting on the filter. same issue, point it down and it wants to stall and does sometimes. Otherwise, runs fine and strong in the cut. no air leaks, no line leaks, it’s a funny, dangly fuel...
  8. m2theb

    Husqvarna 572 starts but dies

    Vac test on the primer. Pass was hold vac. Think it was 7 psi, but it didn’t much matter. i did vac test the inlet on accident and thought for a moment I had just f worded the thing when it wouldnt pass. Then I moved the test to the primer!
  9. m2theb

    Husqvarna 572 starts but dies

    Found my issue and it was pretty simple. But a surprise pressure and vac tested the carb. Passed vac but not even close on pressure. saw had 10 tanks or less, so it was a surprise that the carb wouldn’t pass. I use VP non E, so I’d like to think it wasn’t fuel related. metering valve screen was...
  10. m2theb

    "You Suck" Thread 2021"--Pics required!

    Thanks also have an 064 in line for the bench and will need an assist. In case your looking for a customer
  11. m2theb

    "You Suck" Thread 2021"--Pics required!

    I don’t think I see one but any chance there’s a Dolmar PS 9000 or 9010 and would you be interested in selling?
  12. m2theb

    Husqvarna 562XP issue

    That’s an AutoTune saw. Did they hook it up to the Common Service Tool and check for error codes or does any updates or resets? As long as it’s autotune, you can get a big jump on trouble shooting if they tie into it with the computer. Decomp shouldn’t be leaking.
  13. m2theb

    "You Suck" Thread 2021"--Pics required!

    CL 075AV. Low use but lots of barn hours. replaced the b/c and major tune up replacing all the soft goods $60 as you see it.
  14. m2theb

    Walbro WA Carb Problems

    Thanks. that was the next step. I needed to have it off to get a picture the hole needed in the gasket. Kit comes with a couple gaskets, w/ and w/o the hole. Just trying to point out that on this carb, use the one with the hole. That’s what I was trying to say with the picture anyway it got...
  15. m2theb

    Husqvarna 435 won’t stay running

    Thanks for the post. I’m struggling with similar symptoms as your saw was. i did a detail strip, fully exploded and rebuilt it. Looking for obvious visual sign or loose screws on the clam shell. Built it back up with the same results. No new parts. After reading your post I went out to check...
  16. m2theb

    Walbro WA Carb Problems

    Been in out of this G a dozen times ive thrown in the towel a couple times I think I discovered the problem and it’s in the rebuild kit. theres a hole in the gasket that matches a hole In the floor, that’s the old gasket the K10 gaskets, 1 and 2, don’t have that hole. but the old gasket back...
  17. m2theb

    Walbro WA Carb Problems

    Did you get to the solution? dealing with a similar issue now on a G and I’m about to go in for the 12th time and pull the diaphragm and use #2 gasket, page one of the post. But wondered if there was something definative
  18. m2theb

    Want to Sell 261/254 parts

    Interested in the 254 flywheel I think the 261 flywheel would do the trick also of the 254 is gone Pm sent
  19. m2theb

    Stihl 064 AV

    Was that the 351-500 or the 350-816 that finally received. I’m in the same boat you were and would settle for the 350-816 if that worked for you.
  20. m2theb

    Want to Buy 61 clutch cover and brake with metal flag

    I’ve got a 266se with the metal flag. Need to verify if that would be close enough Thanks
Back
Top