Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Luuk Cornelissen

    Pioneer p41 army special

    This is the saw cleaned completely
  2. Luuk Cornelissen

    Pioneer p41 army special

    Thats a nice remmington looks like a beast haha one thing i just don't like is that it is not metric, one screw that holds the spikes on is bad and i wanted to put a longer one in. But cant find the thread anywhere. How do you over there check what threat it is? Metric is just measuring the...
  3. Luuk Cornelissen

    Pioneer p41 army special

    Hello guys, The other day i picked up a very nice saw, a p41 army special atleast the air filter cover tells me. My question is does anybody out here know anything about pioneer army saws if it is real? Also i didnt know the p41 had a manual compression release or is that a "special feature"...
  4. Luuk Cornelissen

    Husqvarna 3120xp broken coil

    Yesterday i bought the saw and actually paid a little to much for it. At home i tried the 55 coil on it and it dit start. (I saw a video from chainsaw guy on youtube he did install a 51 coil on the 3120 and it ran.) I did read some part manuals and saw the same part number for the 51 and 55...
  5. Luuk Cornelissen

    Husqvarna 3120xp broken coil

    Is it possible to install the complete ignition from a 3120K? And only the coil or needs the flywheel to be changed to? Because the guy in going to visit also sells a beaten up 3120K that runs so maybe buying that one to would be handy.
  6. Luuk Cornelissen

    husqvarna 51 will not start

    Yeah that compression is way to low, new ring would be the way if the p/c are good.
  7. Luuk Cornelissen

    Husqvarna 3120xp broken coil

    Here some pics, what would be a reasonable price? More like 600? A coil is about €120 for me
  8. Luuk Cornelissen

    Husqvarna 3120xp broken coil

    Hello guy's im sorry if im posting this wrong but this weekend iam going to Belgium (om from Holland) and im going to visit a guy who sells a 3120xp with a broken coil. He sais he did install a china coil and wont run good. (Probably bad timing) he says he wont go any lower than €750 wich i...
  9. Luuk Cornelissen

    Husqvarna 262xp

    Yeah, below 10kg is €6.95 shipping and above is €13.50 or so, but a third of the price is a lot for shipping why so expensive?
  10. Luuk Cornelissen

    Husqvarna 262xp

    .
  11. Luuk Cornelissen

    Husqvarna 262xp

    The saw included shipping was 90 euros it wasn't even broken so i had to make the deal what pics do you want of the saw?
  12. Luuk Cornelissen

    Husqvarna 262xp

    Yeah it droped to 180, but still a nice number.
  13. Luuk Cornelissen

    Husqvarna 262xp

    Well, just tested the compression after the build completed and guess what, 220psi. It will be less the cilinder is filled with oil for installing the pisten ofcourse.
  14. Luuk Cornelissen

    Husqvarna 262xp

    Today i received the parts i ordered, imstalled the p/c and it has some decent compression, didnt test the compression yet but it feels heavy when i pull the flywheel. My plan is to put the saw together somewhere this weekend. And look how it runs, what fuel do you guys reccomend for the first...
  15. Luuk Cornelissen

    Husqvarna 262xp

    Just printing my 0.4mm gasket works realy good!
  16. Luuk Cornelissen

    Husqvarna 262xp

    This is the squish without any material between the cilinder and case, tomorrow i will measure how thick they are.
  17. Luuk Cornelissen

    Husqvarna 262xp

    Just put on the flywheel tighten the nut a little more, it wont move a hair. That is what i dit once with a 262xp. The key's main buisness is the timing as far as i know
  18. Luuk Cornelissen

    Husqvarna 262xp

    Wow that one runs nice I dont know what kind of ring i ordered just a oem and i am curius what compression i get.
  19. Luuk Cornelissen

    Husqvarna 262xp

    Exactly what i wanted to do, solder is 0.060 not very thick. Also a little bot of carbon inside but that is very little. My muffler is the type with a pipe in the front, any options to open these up? Or just drill a extra hole inside the muffler and under the original exhaust pipe? Becauss this...
Back
Top