Search results

I found the problem today. When putting the carb back on the saw, I had split the fuel line and most of the fuel was going into the carb box instead of into the cylinder. Put a new fuel line on and it started on the second pull. I bucked about 12' of maple into firewood before it got too dark to...

Compression is reading about 145. I dont have a vac tester. The saw was running fine when I pulled it apart. I take my 3 most used saws apart and clean them and inspect for any damage or potential problems once a year. This 661 is about 5 years old and I assumed the piston was just starting to...

I pulled my MS661 apart for cleaning and inspection last weekend. I found some light scratches on the exhaust side of my piston and decided to go ahead and replace the piston. I put in a hyway pop-up piston with hyway rings. I cleaned the cylinder with a flex-hone and reassembled the saw. I...

After I reassembled the spool and relief valve after cleaning them, I extended the cylinder fully to purge the air out of the system and it wouldn't retract after that. I replaced the entire control valve unit and still won't retract. I guess I could take loose a line and manually push the ram...

Oil level is good, Filter has only about 12-15 hours of runtime on it but I was thinking of replacing it anyway, just in case.

I have a Champion 22-ton wood splitter. A few days ago it started to not split the wood. The cylinder would extend and retract but when it hit the wood it stopped the ram and wouldn't split the wood. The motor never bogged down or stalled. I removed the pressure relief valve and cleaned it...

KIMG0017 by JCCB89 posted Nov 21, 2019 at 4:44 PMKIMG0019 by JCCB89 posted Nov 21, 2019 at 4:44 PMKIMG0016 by JCCB89 posted Nov 21, 2019 at 4:44 PMKIMG0018 by JCCB89 posted Nov 21, 2019 at 4:44 PMKIMG0015 by JCCB89 posted Nov 21, 2019 at 4:44 PMI got this saw last weekend at a farm auction. The...

Saw I hope to sell or trade

Thanks, But I got a real good deal on an MS261C last night.

I am looking to buy another saw. I am looking for a MS261, MS271, MS291, MS311, MS362, Or MS391.