Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. V

    Husqvarna t540xp question

    If you found the pulse hose disconnected then that will be the issue. A fuel system reset works best to get them running properly again but if you don't have access to the diag. tool the autotune will adjust it back it just takes a little longer.
  2. V

    Husqvarna t540xp question

    Check the pulse hose as I've seen a couple that have split the hose at the nipple on the cylinder end. It causes them to lean out and run poorly.
  3. V

    Husqvarna 240

    Husqvarna part # 579 17 34-01 is a set of three inserts
  4. V

    Partner 5200

    They were made in Italy at Mcculloch's european factory and based on a late model McCulloch design. They came out after Husqvarna purchased the remnants of McCulloch's european division.
  5. V

    echo designers are on crack

    So, Echo adds tool-less tensioners to there small saws just like Husq. and Stihl have on theirs and they add a wrap handle to their pro 60cc saw just like the Husq. and Stihl and that means they don't know what their doing.
  6. V

    cracked ms880 crankshaft.... really ??????

    That's not the first time I've seen that on a late model 880
  7. V

    359 XPW

    The 359W was used here by the forest service and some companies as WCB rules required a full wrap for certain applications
  8. V

    Cheap piston = BOOOOOM! (pics)

    The piston in this picture is made by VEC in India I was not disagreeing that you had a piston failure or what casued it what I was commenting on was the fact that just because it came in a white box from BC it doesn't mean it had to come from the same seller. As I said there are at least three...
  9. V

    Cheap piston = BOOOOOM! (pics)

    There are at least three different ebay sellers from BC selling aftermarket saw parts, you might want to make sure everybody is talking about the same ones. There are many different brands of aftermarket pistons that come in plain white boxes
  10. V

    Carb on Husqvarna 435

    Idle or "T" screw on a 435 is above the H,L screws. H,L screws use the spline tool, get the proper tool if you can find one as it works great. Way better than fishing around with a standard screwdriver.
  11. V

    562xp over 555?

    For firewood duties go for the 555
  12. V

    Skip tooth nonsense

    Carlton offers .325 skip or at least they use to. We have a roll in stock for the customers who have to have skip. We're on the westcoast though and most of the chain we do sell is skip.
  13. V

    Trying to figure out who makes what...

    The 502s/CS-500P is originally a Shindaiwa design, it is an upgraded version of the 446s. When Shindaiwa and Echo merged the CS-520 was replaced in the lineup with the CS-500P. There are a few minor differences between the 502s and the CS-500P, different carb and slightly different porting being...
  14. V

    Echo CS550P... Any experience with this saw?

    The 550P is a good saw but wouldn't make much sense if you already have a 600P. The 550 is a 55cc strato saw built on the 600P chassis so it is underpowered for its size. The 550P is being replaced in the lineup by the CS-590
  15. V

    Differences between Echo CS-590 and CS-600P

    The CS-590 is the first generation 600P but with a laminated bar and spur sprocket. The newer 2nd generation 600P's have the aluminum handle and a 10% bump in power. The new 620P's have roughly 13% more power than the current 600's and also get double dawgs and the option of a full-wrap handle...
  16. V

    394xp oil pick up issues!?!?!

    The hard line should be part of your tank vent
  17. V

    Another Chinese Husky?

    Husq. crown logo is wrong on the bar. I see OEM Husq. bars every day and that logo is wrong. That is a chinese copy 365 and not even a very good one.
  18. V

    Another Chinese Husky?

    Definitely a chinese copy 365 and not even a really good one. Wrong bar, wrong tool kit, wrong handlebar, colours are off
  19. V

    Fuel Injection is already here...

    Great thread. Good pictures and very well laid out. Interesting technology that should only get better.
  20. V

    How good are Cannan bars?

    Those are a chinese knockoff of an oregon powermatch not a real Cannon bar
Back
Top