Search results

1" Pex will flow about 9 gallons a min max with normal temps and standard coil drops that is 85K BTU's. Sounds like you need more flow...

Try Chris Muma Forest Products in Gladwin...

20 cord

Team, I got my Semi load of Oak delivered yesterday lotsof work to do now!

Finally I can stop cutting and splitting firewood and break out the bandmill. I have collected some nice Cherry and Walnut logs over the winter and can't wait to make some great lumber. Mark

I use surplus autoparts shipping baskets. The good thing about the metal baskets as I can stack them 3 high with my equipment. Sizes very but I like the 54x54x48 baskets.

Far too much check your blader on top of the stove..... Also make sure your weighted ball on the roof of the stove is sealing to the pipe. Heatmor designed the stove to run at 2 psi to stop loss of water my stove needs a top off fill about 1 time a year.

Anyone tried the ECO bricks or other compressed sawdust bricks? I'm considering making a big investment to start production of this type of fuel wood, however I would like to know how the everyday burner feels about the product. Mark

I'm thinking about building a portable OWB that could be used for Deer camp and other winter camping. Has any one else designed or made a smaller boiler that has a btu about 80K max? Mark

I own 40 in northern Michigan about 100 miles from my primary residence. I have to consider the cost of hauling wood that far vs getting locally. I do both even with the cost of hauling because I would rather burn wood then letting it rot on the ground in my woods.

How did this effect your stoves preformance?

If you laminate the treads they will be stable and cheaper. There is really no need to use a 3" slab of Walnut for each tread.

Heatmor!....I have 8 years on mine and still love it. Watch you line sizes and make sure they have great insulation and O2 barrier.

Leave the water alone....As far as the chemicals go only the water evaporates not the chemicals....So unless you spill or leak water no need to add anything.

Got the saw home and tore down... New bar & chain, Gas tank, Break handle, Wrap handle and spring mounts Then she will be good as new again think I got lucky as first look I thought she was scrap!

This weekend I desided to take down a few trees in front of my cabin. Three big oak trees so I got all my equipment together. Skid Steer, Large Trailer, My new Husky 372XP Took the trees down without issue even thou I had wires, road trafic and a building to contend with. Then in the process...

Beach is just nasty wood for milling but make good firewood... Mark

Scored me a nice Black Walnut log over he weekend! 30" butt 18 ft long... Will post some pictures later today.

Its Ash

My heatmor runs best at 165 to170 in winter best wood saving idea I found was to reduce chimney outlett to 3" dia. rather than mess with water temp. If you run cooler than 165 to170 you will have buildup issues with most boilers. Mark