Search results

Can i order that coil # 1122 400 1300 from stihl or is it not available?

Hello Jacob J, You guys tried to help me out a while back, and I wasn't able to provide pics that showed what my original coil was. I'm not trying to mess up this thread, but was excited to see a pic of a coil like mine, that has the middle hole offset farther down from the center of the...

I'm looking for the same exact coil for my old school 064. None of the part numbers match up on any of the stihl tech pages, so have you found an actual part number for this coil? Thanks,

Here is a pic of the coil im looking for. The coil that doesn't have the coil wire is the one that i can't find. It also has the small black wire that went to the small black mystery module??

Any ideas??

Here is more info for the illusive 064 coil ? I have the flywheel part # 1122 400 1201 a and the coil has 2 204 222 999 on it. I have bought a coil that i thought would work, but it is only a two mounting screw model and the second hole does not line up. My coil that fits has the middle...

According to the Chart my flywheel takes a Coil that is Not Available anymore. The dealer said nope. Can anyone tell me what the small module is mounted on top of the coil? The small box confused the dealer even more?

More Info?? The saw decided it wanted to spark, it started and ran great for a couple of cuts. Then it would start dying when letting off after a cut, but it would restart. After a few times of this, i'm back to no fire?? The coil and module are bosch. I tried it with out the module, that i...

Hello all of you tech guys, I am having problems with my 064. I have recently resurrected this old girl from the dead. It is currently giving me some ignition issues. It was running great for about an hour or two since i built it. Now it quit running. I replaced the old nasty coil wire, and very...

I can't seem to find why my 064 clutch won't stay dry. After a few hours of cutting the clutch area is very gunked up. I can't find any oil pump to case leaks, i have new crank seals, that pressure/vacuum test good. The oil pump lines are good, but even with cleaning it, and then just 5 minutes...

You beat me to them, I was in a hurry the other day when i saw them. Definately a good find. I would be interested possibly doing the PDF for the 084 manual. PM me or you can call me at 519-0188 Later,

The oil tank side case screw was loose, i'm going to replace both crank seals, as the flywheel side is leaking badly. Thanks for the ideas

I just did a quickie leak test on my junkyard dog 064 and it has multiple leaks, however the biggest one appears to be leaking from the bar oil pump output hose. Does this make sense to anyone?? I thought the oil tank, pump, vent and output hose nipple were all a self contained loop?? I guess...

I would greatly appreciate an IPL and Service manual, my oiler is not quite up to par. I think with an 18" bar and hardwood it is on the marginal side. However mine might be half messed up. Thanks

Okay you 084 addicts, i have some more ???'s about my project. Here are some pics of the muffler. How many versions of mufflers are there for these saws. I think mine is an earlier/older saw. What would be a good mod for my muffler setup. I would like to still run the spark screen, but would...

I am trying to revive a 084 that has many issues. It needs a top end, and has been rode hard and put away wet. The clutch area has me stumped. The clutch brake mechanism is missing completely. That i can conquer later, however the 4 springs that drive the oiler gear off the clutch drum are gone...

I'm not trying to steal this post, but i'm still unsure about the limited, non-limited coil setup. My 084 project has the coil setup as shown in the first pic with the external trigger above it. The coil #'s are 2204-222-114. Can anyone cipher that for me. Is it good or bad???

watch on ebay $100 or so, or the dealership, if you don't mind paying big dollars Later,

The late 2000 and early 2001 tranny's were very prone to failure. We had both of ours let go. They have a diode that fails and they start acting and shifting weird and then they are done. Brian's Truck Shop in arkansas is the place to go for a built trans. The warranty and service is top of the...

I am rebuilding my Asplundh 12" drum chipper, and am wondering if the pros set the Blade / Cutter bar settings to the Manual specs or have you guys found some other favorite specs. I am really anxious to get it it up and chipping.