Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Northern tool northstar 30t splitter

    Look up the splitter specs. They are not fast.
  2. D

    Wood hauler

    I do make a mess. I put trash into the red basket under the splitter. I find that if I split in the driveway, it is easy to sweep up on the paved surface. You can see some of my covered wood storage behind the noodled blocks on the table. I have had my PowerWagon over 20 years and use it...
  3. D

    Wood hauler

    Now build a rack on that powerwagon and haul some wood!
  4. D

    How much log splitter can a 5hp electric motor drive?

    Are you looking at a 3400 RPM motor to match 3600 RPM in a gas engine? Many elec motors are 1750 RPM.
  5. D

    Sharpening

    I was filing chains today when my wife looked in the door and said "I see you are sharpening blades." I gave her a pass because she has been a good wife for 39 years and I know she was feeling bad because the puppy has been regressing on the housebreaking the last couple days.
  6. D

    Splitter problems

    I had something similar with my snowblower. A baffle inside the muffler had rusted off and become loose and after a few minutes would work its way in front of the outlet and the engine would die. The baffle would then fall away from the outlet and I could restart it. It would then run for 5...
  7. D

    Need Stihl 028 Part Info

    I want to replace the tank vent, fuel and impulse hoses on my 028 Super. Are aftermarket parts OK or should I look for OEM? May be hard to find OEM for a 32 year old saw. What brand aftermarket should I look for? I have looked for the tank vent hose and the new ones look to have a little...
  8. D

    Runnin' Loads

    We do not have a firepit. We have talked about having one but have not got excited about it.
  9. D

    Runnin' Loads

    I had a good load on the Tacoma. It was punky cottonwood and had very little weight. It got bad before I had a chance to make firewood out of it so it was off to the yard waste site. I felt good getting rid of it as I know it is not much for firewood.
  10. D

    Location of DHT log splitter serial number

    Mine has a sticker on tube below the main beam. At the hinge point where the beam goes horizontal or vertical. Sticker could come off I suppose.
  11. D

    lowes sale

    It is a little different than the regular DHT splitter. It is missing the pieces welded on top of the slide that kind of look like a log cradle. There is no table on it and it will not accept the long solid table sold as an extra on the regular DHT splitter. I do not think there is a table...
  12. D

    New Guy - Just Bought a 038 AV Magnum - Where to Start on Maintenance and Mods?

    I have a 038 MAG that I bought new that was made in Brazil. Be careful when modding the muffler. I got a hole too close to the top and it wanted to melt the top cover plastic. I had to cover that hole.
  13. D

    Liner install with no access

    When my stainless liner was put into a masonry chimney the installer removed a number of brick on the out side to get access to the bottom of the liner. He had some sort of electric impact chisel that easily took out the cement between the brick and they would fall out. He put a sideways T at...
  14. D

    New Commercial level log splitter

    DHT, I was asking about your present 13 and 17.5 GPM pumps. What is the high pressure section? Surely not 6 GPM. Thanks.
  15. D

    New Commercial level log splitter

    Question for DHT. On your present splitters, is the high pressure section of the pump actually 25% of the low pressure section? I looked at a splitter at Fleet Farm where the low pressure section was 12.3 GPM at 3600 RPM but the high pressure section was only 1.7 GPM which is no where near...
  16. D

    Looking for some winch info

    I bet that is a hand crank with the square shafts on the right side. Different shafts for different speeds because of inside gear train.
  17. D

    Another hot DHT 35 ton? Ideas

    For DHT. If you find that quality fluid is so important, do you have recommended brands? To the consumer, one pail of hydraulic oil looks as good as another. You may not want to get into brand war but how are we supposed to judge quality?
  18. D

    Looking fo video

    That Is the one. THANKS!!
  19. D

    Looking fo video

    Can someone help me find a video where a man has his Dolmar mounted to a board to cut up small branches. He uses the top of the bar and has a wire set up to work the throttle. I am sure I saw it here and have not been able to find it again. The folks on the firewood board were not able to...
  20. D

    Looking for video

    No, that is not it. The one I want has the saw fixture made entirely from wood. Thanks for trying.
Back
Top