Search results

Advertise with us
Rugged made
Wesspur
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    boots for spur climbing

    I've climbed on Asolo Fugitive for years. Ground, spur, and pruning.
  2. C

    Want to Buy 12HP motor

    I have a 18 hp briggs horizontal shaft. Also a older 910E
  3. C

    What's Your Length???

    24"-32" depending on species of wood. Tip of the bar to the chip deflector on the 460 and on the smaller saws the full length of that saw. Chuck D.
  4. C

    .325 vs 3/8

    I purchased a 100' roll a 3/8 stihl chisel for my 031, 460 and my dolmar 510 w/16" bar. For me it keeps everything the same. With the dolmar only being 50cc, I keep the rakers at .15 to .20. Anymore then that I would have to hold up the saw.
  5. C

    Stacking VS Piling

    What works for me is. Standing on end the first row of wood then pile on top of that, only keeping the piles 8' x 6' x 60' and growing. I stacked for five years on pallets but it comings down to it if you burn alot of wood, how many times to do you want to touch it? Chuck D
  6. C

    Auto-cycle Valves

    Triptester Just like in a regular control valve you can adjust the pressure to a higher or lower psi? Factory is what 2250psi? So my question is that couldn't you do the same with a autocycle valve? Say 1500 or 1750psi? I have a 5" bore also. I get your point with running to max psi with...
  7. C

    Auto-cycle Valves

    Bought one just after George G postewd the web site. With my 22gal. tank I will keep that info in mind with splitting year round Ponyexpress. Swamp Yankee- I have a 12 sec. cycle time as well. It will be interresting to see how much faster and easier it will become with a 5x30x2 cylinder...
  8. C

    Auto-cycle Valves

    Well put ponyexpess 976. To many sue happy people out there. Thank You George G. Chuck D.
  9. C

    Auto-cycle Valves

    What happened to the auto-cycle valves that you could purchase for northern tool, dalton, or surplus center. Did they take them offf the market? Safety reasons? I have not tried ebay or amazon yet. Thanks Guys Chuck D.
  10. C

    Help with tree type with pic

    Chinesse Elm
  11. C

    How much do you burn in 24hrs

    1970's 9x5x6 tandem axle horse trailer that i fill every 18 to 20 days when it's cold. Chuck D.
  12. C

    Apples too Apples For OWB

    WM 4400 heats 3600 sq. 117 gals of water. fire box is 36 x 42. 5 logs 6 x 30 holds for 12 hrs. at 6 above. Good Luck Chuck D.
  13. C

    OWB, Ash Removal?

    I shovel out 5 gallons of ash a week, give or take. I found out if I keep a good ash rotation it burns right to a powder. Chuck D
  14. C

    Wood ID please

    Cottonwood.
  15. C

    I think I've talked myself into a tractor

    I bought a 99' JD 4600 w/400hrs. for 16K. Save your money buy used. Have you looked at a JD 4300? 4200? Good luck Chuck D
  16. C

    power out woodmaster 4400

    I wired the boilier and furnace together. Then ran a pig tail out of the box. I barrowed a 1500 watt generator with a 45 min. gas tank so it was a quick fix. Good luck Chuck D.
  17. C

    Burning bark in OWB?

    I use bark to help get the fire going in the boiler.
  18. C

    Best General Boots for Woods?

    I wear Asolo's and Kayland's. I pay $150 to $200. I used to buy Red Wing loggers but the sole's wore out to fast, also not being gortex didn't help. I like the backpackers style of boots because of their light weight. Good Luck Chuck D.
  19. C

    Question on spiltter build

    Mines 5/8" with bracing along the top. Its bent, but I have a 5" bore.
  20. C

    Old Splitter New Problems

    I had the same problem with my hydro tank. Mine tank is 21" pipe x 20" tall in which i thought also that it would be fine to just dump the oil into the top of the tank, but after 2 or 3hrs of use the cylinder would start to stutter. I solved the problem with a down pipe half way down the tank...
Back
Top