Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. COWBOYJAKE

    how do I Change the main jet on a 346xp

    Well I have the carb apart due to needing new pump and seals. It looks like it was pressed in from the outside. Does the carb need to be warmed to get it to come out it looks like an interference fit
  2. COWBOYJAKE

    how do I Change the main jet on a 346xp

    I have been topped out on the H screw and the saw still runs more on the lean side than I would really like it to. I want to mod the muffler and I am afraid if I do I wont be able to get more fuel to it
  3. COWBOYJAKE

    how do I Change the main jet on a 346xp

    I figured the non kalifornia jet would be a larger jet so when I do some mods I could pickup some more power. The CA saw comes with a different jet and the adjuster limits, I figured it was to run leaner to limit emissions :chainsawguy:
  4. COWBOYJAKE

    how do I Change the main jet on a 346xp

    I bought a non kalifornia main jet for my 346xp, I figured I could get a bit more fuel and hp out of it with this jet. And while I have things in pieces I am going to file off the adjuster stops. I can not seem to figure out how to get the main jet out. how do I get it out?? Thanks! Jake
  5. COWBOYJAKE

    slightly tweeked chain

    I will do, I was just worried about extra wear on a $70 bar from a $17 chain. Thanks!! I will just make sure it sits nice and moves easy
  6. COWBOYJAKE

    slightly tweeked chain

    I was cutting today, and the chain was working its way a little loose and ended up coming off. there are two drive links that are tweaked just enough to not fit into the bar and go all the way down. Would yall chuck this chain in the scrap bin or try to massage those two links? it is a almost...
  7. COWBOYJAKE

    385xp left side chain brake screw

    Does anybody know the thread pitch and size for this screw ? We have no local dealer and everywhere I can order it from its gonna cost like $20 I figured I will just get one at the hardware store. I think im gonna have to drill and tap to the next size up possibly.
  8. COWBOYJAKE

    The Beg for Manuals Thread

    service and parts for 346xp OE and 385xp PLEASE!! THANKS!!
  9. COWBOYJAKE

    new to me 385XP!!

    This new saw is so great! I ran through a gallon of gas in it yesterday, I dont know how much I cut but its alot! One thing i noticed is the compression release does not always pop back out on its own. and the screw on the left side of the break handle come out, I gotta run one of those down...
  10. COWBOYJAKE

    4000 year old wood

    it says they carbon dated the root structure samples to get the age
  11. COWBOYJAKE

    Husky 346XP for "the" firewood saw?

    the old 45cc 346xp is all I have had for the last 8 years for just what your using it for firewood. It has been great, the only reason I really got a bigger saw just now is I got onto a place that has a bunch of huge oak that it standing dead from a fire that I need some more hp to deal with...
  12. COWBOYJAKE

    new to me 385XP!!

    well it showed up today! Its in pretty good shape, fueled, oiled, started on the second pull! runs awesome, i tore into some big oak and its awesome! Hopefully this summer im gonna mod the muffler on it and the 346
  13. COWBOYJAKE

    new to me 385XP!!

    What chain are you running on yours? do you cut mesquite also? I know on my 346 the 20lp chain does not hold up real well in it like the vp95 does. I may have my saw adjusted some once Brad is taking in some more work again. I think im gonna muffler mod both saws sometime this summer.
  14. COWBOYJAKE

    new to me 385XP!!

    Im planning on at least muff modding, I still have not modded the one on my 346 I needed another saw before i messed with this one. Plus I need to cut the stops off the carb adjustment knobs on the 346. Yeah the mesquite is HARD especially alot of this stuff a fire come through and its...
  15. COWBOYJAKE

    new to me 385XP!!

    I just picked up a new to me 385xp, Are there anything I need to look out for or what would be the first basic mods to make? Its coming with a 20" bar and im gonna get a 28" bar What is a preferred chain for this saw in Oak and mesquite? It will be nice to have a bigger saw again...
  16. COWBOYJAKE

    Quadrafire 2100 millennium wood stove

    I ended up getting a 3100 step top. The wall clearances were a little smaller with the step top and the ash tray is pretty nice also. Plus the more rustic looking legs instead of the square base. Gonna go get it on friday!!
  17. COWBOYJAKE

    Quadrafire 2100 millennium wood stove

    yeah thats what I have been thinking I found another dealer that normally carries the 2100 so I think im gonna make a trip up there tommorrow. Not like I want to do anything else in 20deg weather... I want my global warming back!
  18. COWBOYJAKE

    Quadrafire 2100 millennium wood stove

    Do any of yall have one of theese? We have a 1000sqft ranch house thats gonna get added onto to about 1600ft and was looking at one. We have an older acorn stove that is not real big, and want something for more heat and outside draft option. Also I need a good internet dealer. Our closest...
  19. COWBOYJAKE

    runs for a minute then dies.....

    thanks guys!! it was a broke fuel line right at the tank i just happened to think about taking a piece to town with me to get some more and i went to get it off there and it broke right off thanks again
  20. COWBOYJAKE

    runs for a minute then dies.....

    ill have to get a comp gauge to check comp. it feels like the comp is good. ill have to check the fuel lines i think that ethonal fuel could have done it there. i know in race cars ive had if i didnt flush the methonal out of the fuel injection system it would clog up on me. and my dads...
Back
Top