Search results

So you don't like NGK or E3 spark plugs? Am I reading that correctly? So put in a Bosch and be done with it.

Cases are different due to the different transfer ports, and the obvious screw caps instead of flip caps.

I think they put a little extra in the pouches because they are so small and some people might not get all the oil squeezed out of them when adding it to their fuel. FWIW i run OPTI 2 at 64:1 in our 2-stroke motocross bikes from 50cc to 250cc and of course use the same fuel in the...

Nice! I recently picked up a used Lewis winch. I bolted it up to a J-red 2071. The cable was kinda haggard so I replaced it with Amsteel Blue rope. It'll probably be springtime before I get to try it out.

Last weekend I bought a used Lewis winch with a MS290 attatched to it. I didn't want the saw but i really wanted the winch and the guy didn't want to separate them. What a piece of junk those 290s are. Plastic garbage. Anyhow it worked out OK cause I put a used 20 inch bar on it and it...

I am in Canada which has been on the metric system since before I was born but I don't necessarily prefer metric. All buildings and building materials are standard measurements (4x8 plywood, 8ft 2x4s etc...). I measure my tire pressure in psi not kpa, i weigh 160lbs and am 5'11" tall, i haven't...

Wow! Thats all I can say. Your trimmer will never know the difference if You run it at 50:1 just like all your other stuff.

Should work just fine. Where do You get the tackifier?

Yep, looks real good to me. You're going to like that saw.

So let Me get this straight, You point the whip straight out the back of the saw to make the saw a total of 4 feet long?? Seems to me that a 4 foot long chainsaw would be awful awkwad to try and move around in the woods.

Hmmmm.... gives a whole new meaning to the phrase "sharpen that sh#t up". Sorry, couldn't resist. A 7/32 file will work just fine.

Pull the muffler and measure the bore through the exhaust port.

Nice writeup. A lot of people are pretty intimidated by these brake setups.

I have a couple of those same bars. They take 84 drive links of 3/8

Yep, it's a chusqvarna alright. Also, look at the tag on the lower right of the box with all the Asian sounding words on it.

I give em a shot of Fluid Film lube when I am putting them together.

That just won't do. Everyone knows the red ones are stronger out of the box than the orange ones. :msp_tongue: Or maybe they just feel stronger 'cause they look so cool!

Can't answer your question, but I think You stole my username.

I agree with Brad 100%. You definitely need the alignment dowels.

Yes.