Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. L

    Want to Buy Stihl 661 bearings

    Buy set of gaskets 1144 007 1601 for 41.00 and have everything but bearings. Will be money ahead.
  2. L

    Low compression - 60 psi

    Two different cylinders on that saw so make sure and get the right one. I happen to have a new one here for the early style.
  3. L

    Sold Stihl MS361

    DOM 11/2009
  4. L

    My guess is new saws will be going by the roofh.

    Sent from my iPhone using Tapatalk
  5. L

    Meteor piston : will it work

    I just put a 2002 piston in one and it is fine. Non M-tronic. I think they just want to charge more for the pro saw version.
  6. L

    025 dies immediately.

    I would be checking for impulse sounds like something going on with it.
  7. L

    Is Stihl 390 piston cyl. Interchangeable w/391

    Three are also two different MS391 cylinders. The intakes are different.
  8. L

    Stihl MS280 stuck crank

    Pull the flywheel and make sure the oil tank screw didn't back out.
  9. L

    Want to Buy Needed for an old Ah 47 mono

    I don't have one, but is it like this? http://www.ebay.com/itm/NOS-TECUMSEH-REED-PLATE-470102A-CART-1-DRAWER-D-/281632803319?hash=item41929f89f7:g:NngAAOSwrklVCIDD
  10. L

    MS310 air leaks afte Jar replacement.

    Run the piston up to TDC and dump it out of the intake port if you can't get most of it out by turning the drill bit and pulling pieces out. Might be worth pulling the whole engine it out and getting all the sealant out. You don't say the sealant is silicone but if it is I would for sure take it...
  11. L

    MS310 air leaks afte Jar replacement.

    Stick a drill bit by hand down the impulse hole and see if you can get it through. Should be able to get a little piece silicon out of the cylinder.
  12. L

    MS310 air leaks afte Jar replacement.

    Did you have the muffler and carburetor blocked off when you checked the impulse for vacuum? If not it should not hold a vacuum.
  13. L

    MS310 air leaks afte Jar replacement.

    Check the impulse nipple on the engine. He may have put so much silicone in the pan that it is plugged.
  14. L

    T540XP or Rebuild 200T

    I was in the Stihl dealer the other day. They told me Stihl is saying no warranty for homeowners buying a top handle pro saw and 90 days for a tree service. Anybody else hear this?
  15. L

    044 cylinder look

    The 044c I have is a 10mm.
  16. L

    044 cylinder look

    Bingo.....044C casting!
  17. L

    Sold 200t runner or project

    http://www.arboristsite.com/community/threads/stihl-020t.294900/
  18. L

    Anybody got the part number for the Stihl 4-mix valve adjustment kit? For an FS130.

    See if this helps. http://www.arboristsite.com/community/threads/stihl-4-mix.107382/ Kit number is 4180 007 1005
  19. L

    Stihl MS280 hard to pull

    And there are different modules for with or without intelligent engine management. Only MS270-MS280 take the same.
  20. L

    Stihl MS280 hard to pull

    Take the recoil off and check the fan housing screws. They are known for backing out and wrecking havoc on the flywheel.
Back
Top