Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. 93Dakman!

    Mystery to me issue

    If it bubbles when you open the cap, then there is still a vacuum in the tank. I would continue to inspect the breather vent tube and the element on the end of that tube
  2. 93Dakman!

    Want to Sell Jonsered 2054

    I cohld look. Do you know what else will cross over to that machine?
  3. 93Dakman!

    Want to Sell Jonsered 2150 Jubilee

    I have for sale a Jonsered 2150 Jubilee Edition saw. This saw runs great. Has a new air filter, rebuilt carb with OEM carb kit. New Muffler, Cylinder and Piston. Has not been ran enough to seat the rings to the cylinder. $350 obo
  4. 93Dakman!

    Want to Sell Jonsered 2139T

    Jonsered 2139T For sale. Runs great, starts up easy. Has rebuilt Carb with OEM rebuild kit. I run this saw often. $300 obo
  5. 93Dakman!

    Want to Sell Jonsered 2165

    I have for sale a Jonsered 2165. Saw is in great shape. Runs great and has alot of power. Has a rebuilt carb with oem carb kit. This saw can accept a 72cc big bore cylinder and piston. $500 obo
  6. 93Dakman!

    Want to Sell Jonsered 2145

    I have for sale a Jonsered 2145. Great saw. Runs great. Has a rebuilt carb. $250 obo
  7. 93Dakman!

    Want to Sell Jonsered 2036

    I have for sale a Jonsered 2036 in great shape. Has a rebuilt carb and new air filter. $175 obo
  8. 93Dakman!

    Want to Sell Jonsered 2159 2159c

    I have for sale a GREAT condition Jonsered 2159c. It is in super shape and runs just as well as it looks. has a new air filter and OEM carb kit installed. $350 obo
  9. 93Dakman!

    Want to Sell Jonsered 2171

    I have for sale a Jonsered 2171. This saw is all original and very powerful. The only thing non stock is the carb has been rebuilt with an OEM carb kit. This saw runs great. I use this saw often, and will continue using until sold ;) $550 obo
  10. 93Dakman!

    Want to Sell Husqvarna 55

    I have a Husqvarna 55 For sale. Runs great, has alot of power. Rebuilt carb with oem rebuilt kit. $300 obo
  11. 93Dakman!

    Want to Sell Jonsered 2054

    I have a Jonsered 2054 saw for sale. Super condition. Runs great. Lot of power, low weight. Rebuilt carb with oem carb kit. $300 obo
  12. 93Dakman!

    Want to Sell Jonsered 2045 #2 For Sale

    I have another Jonsered 2045 for sale. Brand new saw, rebuilt carb with oem carb kit, just in case. $250 obo
  13. 93Dakman!

    Want to Sell Jonsered 2045 For Sale

    I have for sale a Jonsered 2045. 200$ obo Runs great, new air filter, rebuilt carb using oem carb kit. VERY few hours on this saw. I have ran this after cleaning the carb around the house.
  14. 93Dakman!

    Jred problems

    Rev it up while adjusting the H needle. Slowly bring the needle in while blipping it to wide open. When it goes from being rough sounding to fast, flat, and smooth, you then slightly back the H needle out until it is just on the fringe of sounding rough again.
  15. 93Dakman!

    Jred problems

    Inspect your plug cap and the spring that goes into the plug wire.
  16. 93Dakman!

    HUYOSEN 5520

    Anybody have one of these? Seems like a steal, all for $139. Things I know from the photos: 1. Professional model 2. You open the side cover by removing the bucking spike. 3. Industry first: usage of the inverted plate 4. You only have to adjust the chainsaw to 04-0.6 inches. WOW! 5. It is the...
  17. 93Dakman!

    stihl 031av

    When you took it apart did you thoroughly degrease the inside of the recoil cover, the big isolation washer, the spring and the rope holder/pawl assembly? They must have no bar oil, no greasy buildup, no oil, no lubrication etc. They should be cleaned with brake clean or degreaser, sat to dry...
  18. 93Dakman!

    is this damaged cylinder usable?

    The deep grooving doesn't start till after the transfers are open anyway.
  19. 93Dakman!

    is this damaged cylinder usable?

    For general firewood cutting and work, yes, I would totally run that cylinder. For my self. I would not put that cylinder on a customers saw though, unless they specifically asked me to help them out on price due to financial hardship. What caused the grooving? Broke ring? Needle bearing...
  20. 93Dakman!

    Sold Echo 510evl cylinder

    Do you have a 330evl, 440evl or any 650evl saws?
Back
Top