While we are on the subject of air filters. anyone know of after market/high flow filters for the dolmar 7900? just wondering. any info appreciated. thanks
B
GB hard nose bar
i baught a GB hard nose bar from hunter a while back, a hi tech titanium CN40 i think. it seems to be a good bar, im not overly crazy about the hard nose bar, but comes in handy in the river bottoms.
B
wally world=wall mart the only thing the place is missing is a booby bar! do any of you guys have Rural King around you? i buy bar lube from them, they run it useually 2.50 per gal and on sale for 2 for 4.00, seems to be the same as any other.
B
Kevlar sleeves
if these are the type im thinking of, (yellow 2 layers) i use them welding. keeps flash burn and spatter off of my arms. but unfortunately i dont think these would do much good against chainsaw kickback. i think they are too tight to the skin. JMO.
B
All good points, but for the most part carbide should not be very sharp for any purpose. because it is so brittle, if it is sharpened to a fine edge, you risk busting the carbide. you should also avoid interupted cuts with carbide.
B
can anyone tell me how this saw compares tp the oleo-mac gypo has listed in the used equipment forum? who carries parts, what is the bar mount? any help appreciated.
B
do it somewhere else
i read the thread, i believe it was "cylindar problems" pesonally, i think if there was a problem then it should have been taken up on a personal level, not on an open forum. JMO.
B
power porting the 7900
does the 7900 take well to power porting? what does it cost to have full woods mods done to this saw by ehp or dan? i had a husky done by walkers about a year ago and was and are still very pleased with the result. it cost me 150 dollars plus shipping. but from what...
hey fellas' i came across and add today and was wondering what the normal price of a 7900 was. is 549.00 a good buy, or should i wait for a better deal? if there is a better deal, who has it? any suggestions?
thanks,
B
i baught an echo 351LV at an auction a month or so ago and i dont think 2 of the teeth were filed the same! whats more, the poor sap had filed the rakers down even to the side plates. he11 if my saws cut that bad id sell them too!
B
does anyone know if the new echo cs351 bars will fit on the 351vl? i cannot find a .325 pitch bar for this saw, and am hoping another one from a different model will fit. thanks for any info.
B