Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Grande Dog

    Echo CS-351VL Clutch Removal - Case Split

    Howdy, Take the largest diameter piece of string trimmer line that will it in the hole of the oiler nipple and then slide the oiler hose over it and onto the nipple. The trimmer line will keep the hose from crimping or folding whlie you push it on the nipple. Regards Gregg
  2. Grande Dog

    Sold 2 full boxes of Griffiths & Beerens Harvester Chain 404 .080

    Howdy, Sorry, I've been single jacking this week. Don't give up on me. I'll be in this weekend if you want to try and call me on my cell 707-354-3212. Regards Gregg
  3. Grande Dog

    Husky 394 Stripped Felling Spikes

    Howdy, There's usually a few MM of threads left beyond the reach of the stock bolt. If you've been living right, you can screw a stud in with JB on it. Then double nut it. Regards Gregg
  4. Grande Dog

    Sold 2 full boxes of Griffiths & Beerens Harvester Chain 404 .080

    Howdy, When you call, ask for Gregg. I've got an appointment today, and will be leaving at about 12:15 PST. I won't be back until Tuesday morning. Regards Gregg
  5. Grande Dog

    Sold 2 full boxes of Griffiths & Beerens Harvester Chain 404 .080

    Howdy, I don't have any 753HSFL114, or 753HSFL104 similar bars. With the Oregon numbers, the 114 has the auxiliary holes, and the 104 doesn't. When you're ready, PM me with your e-mail address and I can send you a PayPal invoice, or you can call with your info. Regards Gregg
  6. Grande Dog

    13/64 file vs 7/32 file on 3/8 Stihl chain

    Howdy, I agree that 1/64 isn't much on a flat plane but, when you add the 10 degree up angle the open end of the top plate gets a sharper angle. The biggest advantage and the greatest efficiency to a square, straight, or flat filing or grinding is chip flow. Otherwise known as splitting hairs...
  7. Grande Dog

    Super sharpening???

    Howdy, That ceramic rod comes from the machine tool industry. The use it on milling machines to produce a scaled, or scalloped finish on surfaces. Regards Gregg
  8. Grande Dog

    Sold 2 full boxes of Griffiths & Beerens Harvester Chain 404 .080

    Howdy, There's 1484 links per reel. The most common loop for that bar is 74 but can be different depending on the drive sprocket size, and the application it's mounted on. Considering that's what you're using, it would be $153.56 to you door for 20 loops of chain. $133.56 to your door for a...
  9. Grande Dog

    Sold 2 full boxes of Griffiths & Beerens Harvester Chain 404 .080

    Howdy, Normally the deal is for the lower 48. If you don't mind the repackaging, I would do it for you also. I fold 2 opposing ears of the reel on both ends and it goes in a USPS "fits it ships" box. If you get all the same sized loops, I would spin up a reel for a $1.00 a loop. Regards Gregg
  10. Grande Dog

    Correct bar for 090/070?

    Howdy, I have access to Cannon brand bars. Let me know what your looking for and I'll quote you a price. Regards Gregg
  11. Grande Dog

    Sold 2 full boxes of Griffiths & Beerens Harvester Chain 404 .080

    Howdy, If anybody happens to be looking for more of this chain, I have it for $133.56 per 100'. It does qualify for free shipping while the sale is on. http://leftcoastsupplies.com/product/100-gb-404-x-080-harvester-chain/ Regards Gregg
  12. Grande Dog

    Stihl 012 av excess oiling?

    Howdy, There's a little brass ferrule that's in the end of the oiler hose where it feeds onto the bar. Check to see if it showed up missing. Regards Gregg
  13. Grande Dog

    Want to Sell Stock on hand Sale - Free Shipping on Orders over $50

    Howdy, Well, were going to give the free shipping a try on orders over $50. Regards Gregg
  14. Grande Dog

    Correct bar for 090/070?

    Howdy, I have some 44" GB bars at a good price ($148.63) that I would like to get shed of: http://leftcoastsupplies.com/product/44-gb-extra-long-titanium-repl-nose-bar-404-063-gbf-hs44-63rq/ Regards Gregg
  15. Grande Dog

    Plate between saw and bar?

    Howdy, I'm pretty sure the Lo Pro standard spline rim was purchased at the same time. The bar also has a Lo-Pro tip so, it should be pretty smooth as far as pitch goes. Regards Gregg
  16. Grande Dog

    272xp frustrations

    Howdy, I was thinking along the same path as Cantdog. I've seen throttle plates get worn enough from the side thrust of the throttle return spring to hang the plate open and not return to idle. You said a new carb replacement. Was it new, or just a different one? Also, when the saw is at...
  17. Grande Dog

    Plate between saw and bar?

    Howdy, Nobody else has mentioned being tight yet. As long as it moves smoothly (no clicking or clacking going around the sprockets), I would say give her a rip and check it again. Regards Gregg
  18. Grande Dog

    Plate between saw and bar?

    Howdy, Protects the crankcase when the chain comes off. I would keep it in place. Regards Gregg
  19. Grande Dog

    Help pro bar I just bought don’t look right (Pics)

    Howdy, Since the thread was about K095 mount bars, and .058 gauge, I thought I would mention a crazy deal I put together on some product that was gathering dust in the warehouse. It's a 18" .375 x .058 Jonsered Branded Oregon (188SLHK095) Pro-lite bar and 5 loops of GB (like 73DP without the...
  20. Grande Dog

    Is there a Lo Pro rim for Husqvarna 262xp?

    Howdy, We have them for standard spline drums http://leftcoastsupplies.com/product/rim-3-8lp-x7-standard-spline-gbf-gbr7l7/ If you don't have a standard spline drum on your saw, they can be had from Oregon. There are two available depending on serial number break. Regards Gregg
Back
Top