Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. K

    rocket mass heater

    Hi I have this book, I go read. Someone has a tip to quit a nabure who do play house on a 1000 watt installation making my live miserable. You will not now how hard these bass do get in, it is alowed here before 22.00 hour, unbelieveble noisy world we have to remove that music and...
  2. K

    rocket mass heater

    Thanks pointdexter. Suck me dry ehhh, well then my wife has nothing to do. Oke, serious I have a shimney who is 11 cm wide, and 8.3 meters high, Si I need a rocket that diameter whole along, I did thought by using a fan on the shimney for it so it also can be used for starting, however these...
  3. K

    rocket mass heater

    Did some drawns in sketchup, I see I have to be carefull, bottom is insolated with or ceramic board of fermiculite. these measurements are the best for the firebricks I can buy for cheap, 1 euro piece and are 20.7 x 11 x 6.2 cm
  4. K

    rocket mass heater

    A rocket mass heater may not be limit by a damper, it needs burn full for clean combustion, there is a brick build version who get 250 oC on top, and after burn it last long heating. Do you have picture of that system with elbow ventilator. I have a 8.3 meter high shimney, I can do it on top...
  5. K

    rocket mass heater

    I have seen people do use fire concrete for making the riser and filler unit for a rocket, is this the better way, beacuase of insulation of vertical burn chamber, for me it looks a more easy way and more precies and flat so it do not leak on barrel.. I go make a electric shimney fan myself...
  6. K

    rocket mass heater

    Hi I have nothing yet, except a normal metal stove who i have upgraded with a secondairy combustion tubes. that drawn is of these stove, a french type. http://s182.photobucket.com/user/kees50/media/DSCN1844_zps0a21ecca.jpg.html...
  7. K

    rocket mass heater

    Hi All I go soon try a rocket mass heater build, I do not build the sit place, only the rocket stove itselfs, maybe I do use brick in stead of a drum, I have seen here a stainless steel version of it but stones will keep heat longer. I have brick for 1 euro piece 20.7 x 11 x 6.2 cm. So my...
  8. K

    home built secondary burn chamber

    Hi All It is a time ago that I was here! I have done some things with the stove like a 4 tubes in it and more heat exchange, however it get difficult to go secondairy, I have thick fire bricks yellow ones and I think the fire itslef is to cool. I hear that primairy has to be shut off with...
  9. K

    Bought and installed new Englander NC30

    graveyards are full of live, death don,t exist, it is only in our minds. oke my stove a french Supra 20 years old wil now build in afterburner who has still be perfected, a friend who is nature scientist go calculate the pad and surface to prehead the air, he say under the firebed and a line...
  10. K

    Bought and installed new Englander NC30

    never to late to make a topic living again.
  11. K

    Bought and installed new Englander NC30

    I have a stove equipped with burning tubes and it works very nice but maybe it can better, also a window clean is now inserted. see the burning, flue temperature was 180 degrees most it is around 200 degrees never higher in the stove a lot of stone channels made so it stays very warm for a long...
  12. K

    Bought and installed new Englander NC30

    iside picture Englander NC30 I am very curieus about the inside of this stove, how is the secondairy air implemented, I can nowhere find a picture of the inside of this stove, maybe you can help me with a link or your own picture. thanks in advance
  13. K

    Wood stove hack-secondary burn tubes added

    afterburn now succes Hi All I have put in a insert, I have preheated air from under the firebed, and with two pipes of 5 x 5 cm to the pipe above the fire, now it wil burn, like hell. firestones get redhot. here movie. YouTube - ‪Video-0004.mp4‬‏
  14. K

    Wood stove hack-secondary burn tubes added

    That is nice, een goedeavond dan voor je zoon. to be honest I am more for a way to get a spinning fire in a horizontal way and not vertikal like the burley. I have in my stove holes just below the shimey exit, and just above the glass window and down in the firebed (not below like the most...
  15. K

    Wood stove hack-secondary burn tubes added

    I don,t mean to watch the fire, I have glass, but the floor where the firebed lays on normally it gets primairy air form beneeth I have change it to from the edges it indeed geives fire a twist like a tornado and so more time to burn before go to the chimney..
  16. K

    Wood stove hack-secondary burn tubes added

    nice stiove new idea, here the link to a stover who works like a tornado so to speak, it turns around the flames to mix air. but is it true? http://www.youtube.com/watch?v=r5cr4R700WI I have tryed with holes drilled in the sides of the floor and not from unther the floor, so the...
  17. K

    insert for my stove

    it is ready burns good, I have no holes but a turbulent fire spins around in the firebox, so it burns hot and have a lot of blue flames. YouTube - Video-0006.mp4
  18. K

    Welkom.

    keetingzaag en ik heb in mijn hoofd gezaagt met een electrische ketingzaag van top garden:jawdrop:. de kettingrem weigerde bij de terugslag wat kwam door een oud autospatbord waar ie op ketste, kettingrem deed het al langer niet en het apparaat was pas 2 jar. ik heb nu kranenbroek...
  19. K

    home built secondary burn chamber

    Hi There Hi I have calculated the pad of the air, it has 1.6 sq feet x 2 so for preheat alswel for heat, tubes of 2 inch you get then 6 feet x 2, then you have a real afterburn with very low emissions. I go make a vlame-plate from hollow square pipe welded togehter, so I have a very long...
  20. K

    home built secondary burn chamber

    Hi There Wel again a new message, this site loosed it after try to post it because it ask again for the password, nasty. Here are the pictures, I have put firebrick in it, fermaculite on top for refection of heat, and above that another plate to make the pad for the smoke longer. als I have...
Back
Top