Search results

The plug wire is snapped off at the plastic housing of the coil.

I have what I believe to be an 06 Husqvarna 350 saw with a broken blue coil in it. Looks to be the Nascar edition with the silver Nascar decal on the side of the top cover. The plug wire snapped out of the coil it's self. Is there a difference between the black and blue coils for this model...

I am looking for the repair manual for the Dolmar ps-421. I put a carb kit in the carb and removed the H screw epoxy and need a starting point for the carb settings. Thanks

Hello all, I have a 2009 576xpat that I ordered a new OEM carb for and was wanting to know if the carb needs to be programmed before use, or can you use it out of the box. The new carb is installed on the saw but while cutting lacks power and rpm in the cut and blubbers in the cut also. The saw...

There are a few listed on fleebay, complete top ends for around $75. I have a few 45mm jugs for a 350 but not a 44mm.

Have you tried Nate at Performance Outdoor Equipment out of Ohio? He is a Dolmar dealer and sponsor here and might be able to get you going. Great guy to work with also.

I am looking for a shop manual and parts diagram for a 2009 Husqvarna 576xp autotune chainsaw. Thanks guys.

Looking for a good used flywheel for a 576 xp auto tune to finish my project. The part # I am needing is 537209602. Let me know what you guys have new or used. Thanks.

I tried everything except for that. I got it out. Thanks for your reply.

Bump.

I have a Dolmar 111 that I am replacing all the oiler hoses on, mainly because the lower one was leaking around the hose to tank seal. I am having an issue trying to remove the fastener that holds the inner ware plate on so I can replace the upper hose. I believe I don't have the hose pushed in...

There was a used 576 cylinder on fle bay last week. They were asking $200 or best offer. They wouldn't take less than $169 and that was just for the jug. I ended up buying a OEM top end kit from the little red barn for $285ish. I believe there is a 1 year warranty with the kit but you must do...

Come on guys.......quit busting his balls. He is just trying to sell his saw. If his gauge is off, its not off as much as you guys think. Here is my bone stock Dolmar pushing 180 psi.

I received the bar and chain on Saturday and even got to run them both. I am very pleased with this purchase. Mike is a great guy to deal with. Thanks again Mike.

That's a great job on that 025. You could spend a lifetime around saws and only learn a fraction of what is learned here at this site by just lurking around and asking questions. This site is full of information from guys that have been down that road or live it every day. I myself have learned...

I understand that you picked Stihl over the Husky, but if you ran a Husky 550 xp I bet you would change your mind. I have both the 362 and the 550 and with a 20" bar on them I would grab the 550 every time. I keep a 24" bar on the 362 just for the bigger stuff because the 362 gets to heavy in...

Bump

I am working on my first complete build on my husky 350 and am needing a oem husky 45mm low cylinder. I would also be interested in a nice ported one also. I tried to salvage the straight gassed cylinder but it's to badly scored.

Received my total bar yesterday I am very happy with it. Fast shipping and a great guy to do business with, thanks

I will take the Total bar. Thanks