Search results

Hi All, Chipped away at it all this afternoon. I got it o-u-t. It was a thin metal strip/ring that was on the inner wall of the Thimble opening. That, and chipped away at the old cement, which was paced around it. *New question......do I need to use any 'special cement' to re-cement my...

Hi All- No, the Thimble is probably from circa 1930 or such, when this house was built(?) It looks like a clay pipe/tube, the thickness of a brick, with a thin metal ring on the inside wall of it> -I've never seen anything like this, so it must be 'old-school' original. I'm not all that...

Hi Group, I am installing a wood stove into an existing chimney, which has a Thimble which I can use. I bought a Stainless Steel Chimney Liner Kit which connects the stove pipe outlet to the Liner with a 'tee'. There was no problem installing the bottom cap, and the vertical tee section to...

Hi Group, I just recently changed the 9 gallons of used hydraulic oil from my log splitter. Can I pour this into my houses outdoor heating oil tank, to burn in my furnace? It says that it's combustible. Opinions, please! Thanks, CTwoodnutt

**************************************************************************************************** Hi Mesupra, Did you ever sell this saw? Ctwoodnutt in Connecticut

Hi Group, I saw a place that sells a Husqvarna 372XPG for $780- w/free shipping. What's the "G" indicate? (Heated handle...?). -Can that be shut off (for use in the Summer? -Wouldn't that take power away from the saw)? (Similiar to running your A/C while driving)? Did Husqvarna...

Hi Group, I'm looking for a Husky 372 XP to replace the one that I had which blew up! :mad::( Does anyone have a 'reasonably' priced new(er) one, or perhaps a good rebuilt one? Please let me know! Thanks, -Irv- aka CTwoodnutt in Connecticut

Hello Group, I have a pretty new Northstar 37 ton splitter, which I bought from Northern December 2012, which has seen relatively light usage. It has (and pretty much always had) a pesty little drip, drip, drip from BOTH hoses, right where they connect to the tank with the hose clamps...

Hi Group, I just got my Husky 372xp back from a friend who rebuilt it with a new crankshaft, which snapped right at the clutch, back in August. I bought a Cryogenically-hardened one from Chainsawr, up in Vermont. (Good price!!!). Also a clutch, that I just put on today. Started it up...

Hi Group, How long would a Cord of wood have to be, if I unstacked a 4' X 4' X 8' stack, and restacked it, one log width, 4' high, in one, long single row? I lucked into about 2-3 Cord of fresh cut Maple (mostly green) last week, and would like to speed up it's drying time, if possible...

Hi Group, 'Don't know if this is the correct Forum to ask this question, but you could fit them in your hand, soo, I'm looking for a new pair of non-insulated work boots. I don't need to spend big bucks on them, but want a good pair. - I saw two pairs on line at Walmart. Which would be...

Eight pin sprocket.

Hi Mattyo - I have a local, Danbury, CT buddy who will help me with the rebuild, but it's good to know there are other guys in CT who can help if I need it! I'll contact Brian Plust, when I get ready to rebuild it. Thanks!

Well, I bought the parts new, from Chaninsawr, up in Vermont. This was Spring of 2013. I just dug out the original box, and the parts are from Forester, [Label says]...replaces OEM P/N HU-503 729172/503729194....503 72 91 76/503 74 87 01 Crankshaft.

Never overly tight, just so it turns smoothly, doesn't hang down, etc.

Hi Group, Yesterday, I was just starting to cut a 40' tall, 16" wide Pine tree for a fellow, and my chain came loose on my Husky 372XP. I shut it off, removed the cover to realign it back on the bar, and my clutch fell off. I noticed that the end of the crankshaft, where the clutch attaches...

Hi Gulity1, Yes, I thought of THAT (after I repaired it...). I've seen that happen on my boat trailer lights! I WILL redo that connection this weekend! Thanks for your insight here! Have a good Holiday weekend! CTwoodnutt

Hi Group! * * * Checked it in DAYLIGHT, and yes, inded a Wire became unconnected from a BUTT Connector, behind the engine....cleaned it well, pushed it back in (loose...) crimped it, taped it well with winds & winds of electrical tape, and it started with one pull! - Go figure, it was a dumb...

Hi Group, I have a 2 1/2 year old Northstar 37 ton splitter which I used last week, but now I can't start it??? It's 2 1/2 years old, (10/2/12) and has seen only moderate use, always been covered/ never got wet, treated with care. I put in new gas, added a little oil, checked all switches...

Hi Group, I just bought a Husky 351XP w/20" bar (for $220-) but was wondering what the differences were, between that saw and a Husky 55 Rancher? (That my buddy is selling right now, also)! - Both are 50cc motors, right? - Does one have more power than the other? - Is one more...