Search results

Stihl 020AV in nice shape that I just took in on trade. Not running. Spark is good and compression is 140 psi, piston looks good, needs fuel line and a carb kit. A couple of the side cover screws vibrated out, fuel has leaked out, and there is some gunk in the fuel tank. Great project saw or...

Looking for a Stihl MS261C-M new style (2016) parts list. Thanks!

Looking for IPLs for Stihl 019T and 020T. Thanks!

Was the auto-decomp removed, or did Husky go back to the standard decomp valve sometime after 2005? I don't have a newer IPL. Thanks.

In need of a parts breakdown for a Stihl MS250. Thank you.

Sale pending.

Matt You seem like a good guy and we don't want you hurt. Use a heat gun not a torch! Mg is a flammable metal, and while some guys will say there is no problem using a torch, it just isn't good. Heat guns also heat the bearing areas more consistently. $12 at Harbor Freight.

You can pry out that brass cap with a pick or small punch. Stihl sells the accelerator kit with piston and o-ring, but it's not cheap and I'm pretty sure your dealer won't stock it. There are several versions of the 192 carb- S135, S258, etc and I've found them used on ebay pretty cheap.

Jonsered 2152 (Husky 353) in excellent shape. I bought this saw new in 2012 (2011 model), installed a new OEM non-cat muffler, tuned it properly, and cut with it once. Then drained the fluids and put it on my display shelf for the last 4 years. Comes with the original cat muffler (loose)...

Either seal will work, but I use the 1205 version. Find a good used 192T (not TC) recoil, and it will be the older style without the easy start feature. Use the red Dirko sealant when you put the pan back on the cylinder and make sure to replace the impulse hose.

PM sent

Moving to ebay or CL.

Back to the top

Sorry, wrong bar and chain! Here it is...

Bar and chain, and the screen shot from the software...

Husky 545 in decent shape with only 9:49 hours on it. It has been on the ATV so it has nicks and scratches, and some pitch from Ponersosa pines. Always run on non-eth 40:1 XP oil, piston looks nice, installed a new spark plug and ran a tank through it yesterday. $300.00 shipped to lower 48...

I will include this 20" Oregon ProLite bar and 72LG chain if that helps.

Here are the bones of a nice project saw, maybe a 268 or 272 conversion. Nice Husky 61 cases, new style, 1993, with crank, correct flywheel, oiler, handlebar, and new muffler. This crankcase takes the newer single-piece ignition which is easy to find. $125.00 shipped to lower 48. Please...

Nice Husky 555 in excellent condition, 2011 model, runs great, no issues. I hooked this saw up to the software a few weeks ago and it showed 4.58 hours total. Since then I rave run 1-1/2 tanks through it cutting up some fir, so it has around 5.5 hours on it now. I installed the larger...

Pickup, primary, trigger, cdi, lots of different names that are used. I'm not aware of any way to bench test the primary unit, and they rarely fail, but here is how you can test the coil: Resistance reading on the primary side (two small wires) will be roughly 0.7 ohms. Reading on the...