Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    What the @%&# can i paint my bars with that will stick!?!? Help!!!!

    What about Duracoat? nothing says resale like a digicammo chainsaw bar:rock:
  2. B

    Stihl hd 2 air filter

    I cut a load of firewood with the new filter without the pre filter and it worked great. I came home and gave it a shot of compressed air and it's looking like new again.:bowdown:
  3. B

    Best Stihl saws ever made?

    I got my 460 about 6 mo ago and haven't used anything else since.
  4. B

    Stihl hd 2 air filter

    I'll give it a shot without the pre filter and see how it goes:rock:
  5. B

    Stihl hd 2 air filter

    I got one to replace the old Hd one on my 460 the guy at the shop tossed in the pre filter for free.
  6. B

    Stihl hd 2 air filter

    Should I use the felt pre filter or not.
  7. B

    Poision Ivy for a month Help!!

    Bleach not diluted put some on a cotton ball and apply where the rash is. It WILL BURN!!!! but it works better then anything I have used.
  8. B

    If your chainsaw were a gun what kind and why?

    So if a 660 with a 14in bar is a 454 casull, what would a 290 with a 20in B&C be??? I'm thinking 9mm Hi-Point or a Slingshot:hmm3grin2orange:
  9. B

    If your chainsaw were a gun what kind and why?

    I think My ms-250 would be a Glock 26,It's tiny compact and light but still gets the job done. On the other hand I think My MS 460 would be more like a 1911... a time tested classic you can always depend on, with plenty of options for upgrades.
  10. B

    Anyone selling wood chips or noodle chips from cutting ?

    I have been using the noodles to cover the muddy part of a water road that runs behind our house, works great!!!
  11. B

    Gauge change????

    Thank you Sir!!!!
  12. B

    Gauge change????

    Do I have to change my Sprocket to change the gauge. I would like to put a 36in bar on my Ms 460, but all I can find is 36in bars in .63. Currently I'm running a 28in ORW in 3/8,.50. Thank you
  13. B

    Chainsaw for under $250 for a Newbie??

    Look for a good used stihl 044/440...Cregslist or Pawn shop's
  14. B

    What should the next Build Off Saw be???

    Why not try something diff like a pole saw? Now that would be interesting.....A pole saw with a 28in bar:hmm3grin2orange:
  15. B

    Upgrading from an MS 290

    I would get the bigger saw hell go for a 460 it's only a couple lb, heaver then a 362 and will pull a 32-in bar no problem I have a 290 & 460 and will take the time to put a 25 in bar on the 460 over using the 290.
  16. B

    Who follows the law?

    Here in Northern CA you get a 4 cord permit for $20 and can buy up to 12 more cords at $5 a pop. You must have a shovel,fire ext. and spark arresters on all your saws. I got stopped by the wood cops this week, and the cop only checked my permit and chainsaw but got weard when he asked if me if i...
  17. B

    Stihl bar oiling problem/adjustment

    Your saw should have an adjustable oiler turn the saw over and you should see a small hole with the same arrow as on your sprocket cover where you adjust chain tension. Get a small flathead screwdriver and turn the oil adjustment screw clockwise until it stops.....You should be good to go after...
  18. B

    air filter cleaning and maintanence.

    Which saw is it for...some of the Stihl filters can be split in half. Hot soapy water works good along with a tooth brush, compressed air wooks really good too. Always have a back-up filter though:rock:
  19. B

    Firewood Stolen!

    That sucks!!!! On my last order from Baileys I picked up a Mingo firewood marker and got a really off blue color,makes cutting firewood easer plus all my wood is marked.
  20. B

    Stihl 460 mag problem..

    Is it possible that the motor is flooded???
Back
Top