Search results

Thanks for the replies that helps alot I will see if I can make a deal on the poulan I let yawl know

Looking at a poulan 4000 and echo 500evl for firewood use needing a 60cc saw to run a 24 bar once in awhile mostly would be a 20 I run a 510 dolmar most of the time with a 16 but have a 55 rancher with a 20 also Thanks for any help budget doesn't alow me to buy a echo 590 at this time that's...

Looking at these 2 saws wondering which yawl y Think is better for firewood use

I ran a 391 for awhile the other day and it's a heavy saw it's not bad bucking logs but for cutting or limbic it's heavy I have handled a echo 590 and I think it's feels better Fars as weight I am going to run one in a couple weeks to see how it compares I know it's a lity,e under 4 hp compared...

I am prob leaning towards the 590 when the budjet allows I unless I find a good deal on a dolmar 6400 but for what I can buy the 590 for with a 5 yr warranty good dealer support it helps with decision just want to change the bar to run the same chains I run now which I hear is possible but I...

Not sure if it's a closed port or not if I upgrade to a bigger saw it will probaly be sold to help fund the new one it's pretty beat up but runs good I got it used traded a bmx bike I had not a dime in for it

Looking at 60 cc saws these to came to mind there price is good but I would buy new echo just looking for a little bigger firewood saw I have a dolmar 510 and husky 55 rancher

Looking at possibly buying an 590 echo I hear really good things about them but I want to change the bar on it to match my husky 55 and dolmar 510 what bar would work I just want it easier to buy chainsaw swap them around my friend I cut with also runs the same chains so makes it easier if we...

yea not froze hear at all and it sucks we can't get in to cut any wood and we have a good bit to go git yet the snow acts like a blanket and insulates the ground from freezing its 44 here and going to rain for the next three days could get 6" that sucks we aint never going to get any wood cut

I use atlas therma fit gloves and I like them have not had a long term test yet but so far so good used them last weekend its was around 20 and I was splittin wood with them and was never cold used them a couple weeks ago cuttin and it was around 25 to 30 my hands were statin to sweat going to...

I had a 1st gen cummins and I loved it front suspension is easy to work on and much simpler than the 2nd gen put a flaming river steering shaft in it and you will have no probs I have a 2nd gen 24v now and the creature comforts are better and the rear doors opening are a must for me wish it was...

I would go with the dodge you will not regret it unless you use the back seat alot then go with a 98 or newer dodge anything older and there are no back doors but that 1st gen would be a great work truck and if you need mor power you can adjust the pump and timing alittle and still be reliable I...

the only purple wood I know of is called purpleheart but I have never seen it in log form only milled up already an it is an exotic wood from brazil I think

that would make a great 12v cummins conversion truck thats the type of truck I will be building when I decide to work for my self cummins vplow and utility bed

if you have a charge wire running from your truck for the battery in the trailer just start your truck while winching it helps keep the battery going strong

if I just remove the baffles will that help performance any or just make it louder the exit hole is real close to my brake handle it does not look like I have much room to open it up and still keep my deflector has anybody done one one a 55 and if so have any pics to help me through this thanks

go for a 91.5 -93 dodge you will not regret it they had intercoolers and the heads are better the older ones had issues with cracking around the injectors i will be a reliable truck and if it is an auto it will have od once you rebuild the tranny with a better convertor you will not have any...

it was in sidney I think they only carried them in the fall till they ran out troy was the same way

went to tsc to get dog food after work today and found an x27 was on clearence for 29.99 been on clearence for 49.99 all winter it was the last one I couldnt get it in my cart fast enough finally got me an x27 hopefully will try it out this weekend

how much tongue weight is that single axle going to have I know they are alot more than tandems so you have to figure that as well I know a couple guys that bought singles and wish they went with a tandem because of the tongue weight I do know somebody that has a 6x10 dump and pulls it with an...