Search results

Im about to drill mine out. But 10mm is btwn 3/8 and 13/32. 15/32 would be about 12 mm hole. 3/8 = .375 10mm = .394 13/32 = .406 15/32 = .469 12 mm = .472 are you sure the new larger line is 10mm? I guess i can drill 3/8 and work up if it doesnt fit Followup - i measured the new fuel line...

This is from an old thread. I haven't tried to contact him, but kept the number. Good luck. Bob's Lawnmower Service 7632 State Hwy 7 Maryland, NY 12116-3201 607-638-9297

I use the purple stuff also, but undiluted. It dissolves all the gunk. Be careful, it has a mild acid in it, and has to be rinsed off thoroughly. Use rubber gloves and goggles too.

Thanks!!

Don't know if this is too late to help, but I'm in Mandeville, 20 miles away. Hope you found her.

I live here in the hurricane affected area, had to stay and work thru the storm. I have seen more chainsaw injuries and punctured feet from nails in the last 4 months than I have in the last 15 years practicing emergency medicine (10 of those at a major trauma center). I've seen 2 people sent...

Thanks. I considered using a BP manometer, but there is a problem with that. A BP manometer is scaled in mmHg rather than PSI. To pressure test a crankcase, you have to generate about 8-8.5 psi. That translates into about 450 mmHg. The scale on a handheld BP manometer only goes up to 300...

I've been lurking here for a while, this is my first post. I want to pressure test a carb and the engine. Has anyone ever made the piece to mount over the intake in place of the carb to hook up a pressure tester? What can I use as a nipple to attach the pressure/vacuum line? I hate to admit...