Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. fin460

    Want to Sell Miller Modd Saws Ms661cm

    A nice low hour ms661cm ported by Carl. I've enjoyed using. Only selling because I picked up a ms661 in pieces I plan to have Carl build to replace it. Asking 1150$ shipped to lower 48 pho. Sent from my XT1585 using Tapatalk
  2. fin460

    Want to Sell A nice Stihl MS362cmr

    I don't know anything about this saw except it looks all original and nice. I got it from eBay the guy said it was a backup saw and not used much. It looks like he was telling the truth. Saw cranked up revved and idled as it should, too hot for me to test it in wood. If you find something...
  3. fin460

    Want to Sell Miller Mod Saws MS461

    Carl ported this ms461 a year or two ago for me. Saw is beat up and dirty but runs great. Impressive saw. Only selling because I have too many saws, I have 3 ms460s collecting dust that I need to use, two of them have less than 20hrs on them. Asking 700$ shipped pho in the lower 48, I'm open...
  4. fin460

    Want to Sell 20" techlite bar and ported 562xp

    Hello, I'm getting nervous on selling my techlite bar on ebay. I finally just got a first bidder, but with no reserve it may sell for .99. Last night I had only 10 views, and I think most of those views were from me. I don't expect retail but I would be sick if I had to sell it for 99cents...
  5. fin460

    Sold Snellerized ms362cmr

    Low hour saw, I'm selling this saw for a friend who bought my mastermind ms361. Saw has maybe 5-10hrs on it. I needed the clutch cover and robbed it. It comes with a ms661 cover instead. It works well in it's place. 750$ shipped pho Sent from my XT1585 using Tapatalk
  6. fin460

    Want to Buy Ms661 crank or parts saw

    I have a ms661 with a bad con rod bearing, I need a new crank for it. I would also be interested in a parts saw with a good crank.
  7. fin460

    Want to Sell Jonsered cs2253

    I bought this saw from a friend who moved and quit burning wood. He was the mechanic at the local Jonsered dealership, and I talked him into buying this saw when I bought mine. He barely used it as he still had a cs2152, then it wasn't much longer before he didn't need it. I bought this...
  8. fin460

    Sold Jonsered cs2165

    A nice used cs2165, that I bought off of my friend that worked at the jonsered dealership. he moved and quit burning wood so I bought his saws. I haven't took a chance to run this saw yet, I do know that it is still all oem and original. has a 20" hard nose bar I'd like 375$ shipped with the...
  9. fin460

    Sold Mastermind MS261CM

    A very low used, very nice ms261cm for sale. Not a thing wrong with it, I hate to sell it this cheap but I have 5 or 6 ported ms261s and this one is just collecting dust. It was Kenis Keathley (DexterDays) saw, and he sold it to me in even nicer than new condition, and I've just used it enough...
  10. fin460

    Sold New cs2166

    New with warranty 720$ shipped lower 48
  11. fin460

    Sold Masterminded 346xp ne

    Nice saw 775$ shipped to the lower 48
  12. fin460

    Sold Snellerized Ms362cR

    A low hour ms362cr ported by Brad Snelling. I had to rob the clutch cover and send with another saw. I went back with a ms661 std cover. I like the looks of it, and it fits well. 850$ pho shipped to lower 48 obo Thanks
  13. fin460

    Sold Masterminded MS362CMR

    850$ Shipped PHO or best offer.
  14. fin460

    Want to Sell KS 10mm 044 parts saw

    Nice original saw here. I split the case to fix the leaking case gasket. That's all the saw needed, so I reassembled the saw. I didn't touch the bearings. If that's a problem don't buy the saw, please don't lecture me on I should have replaced with new bearings. If I did it over again I...
  15. fin460

    MS362 Parts

    I have 3 ms362cm's torn down on the bench and 1 ms362 std carb. I need some bearings. I'll order a couple sets from stihl. but I would like to get started. I also need a crank for one. I have a used crank and a bearing set for a ms361. I haven't dug them out yet/found them. I gather...
  16. fin460

    Sold 550xp ported by brad

    A good 550xp ported by Brad Snelling. New 16" or 18" 3/8 husky pro bar 16" bar pictured 595$ shipped lower 48
  17. fin460

    Sold Ms440

    Low hour ms440 my brother bought new and never used much. 825$ shipped pho
  18. fin460

    Want to Sell MS661CMR x 2

    I just wanted to get this thread up for the people who will be attending the Hedgefest gtg this weekend. Carl Miller built these two ms661cmr's and did a great job, I can't decide which one I'd rather have so I'm offering them both for sale, and I'll keep the one that doesn't sell. If they...
  19. fin460

    Help on a 372xp

    A local friend got a great deal on a blown top end nonxtorq 372xp. The saw is really low hour, and came with a lean seized A/M top end. I happened to have a take off OEM piston and cylinder. I pressure and vac tested and found massive air leak where the intake boot seals at cylinder under...
  20. fin460

    Want to Sell Sweet little 024

    Nice 024 220$ shipped to the lower 48. Looks like it hasn't been run much. I really like it, but its not a saw I will use much. I don't have a specific bar and chain for it, sold power head only. I have some ugly 16" bar and chains I could include at 250$ shipped
Back
Top