Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Moparmyway

    Built a sawmill this year

    Looks like he didnt secure the piece, no ?
  2. Moparmyway

    Two Square Ground Chains

    If you click on the links you embedded, they are described as semi-chisel ............ hopefully you do get the square chain.
  3. Moparmyway

    Two Square Ground Chains

    Those are semi-chisel chains
  4. Moparmyway

    Tachometer for tuning

    Yes Most tachs are challenged reading mtronic rpm’s
  5. Moparmyway

    Has Anyone Seen

    Kenny, sadly, seems to be pulling his usual bullshiittt. In a PM with him, I'm the bad guy for NOT complying with his demands (I'll reluctantly post screenshots of the PM if I'm challanged). I do know for a fact that others have tried with Kenny, to no avail. I had to give it a shot, since I did...
  6. Moparmyway

    Has Anyone Seen

    You can have my address, its only done if you decide to do the right thing (send me the saw), or the wrong thing (anything other than sending me the saw) here I've done everything possible to help you get out of this mess. The rest is up to you I hold Bill in VERY high regards, he is not deaf...
  7. Moparmyway

    Has Anyone Seen

    Kenny, Send me the saw please, I'll pay for the shipping, you just let me know how you want it paid. I will see to it that the saw goes where it should go Your idea of a raffle or anything else is NOT the way to go here
  8. Moparmyway

    Looks like the ms400 has arrived

    I don't do craigslist .......... how much ?
  9. Moparmyway

    Looks like the ms400 has arrived

    Pics of the 880 ?
  10. Moparmyway

    Milled lumber project

    Yours looks WAY better than mine ! I really should do the final coat when the space temperature is around 55-60. Would give me much more time to spread the epoxy out and get rid of the very small bubbles that the brush leaves. The size & weight of this project forced me to work outside for...
  11. Moparmyway

    Milled lumber project

    13 brushed on coats, sanding between each coat. Took 3 coats just to begin to seal the checks, and about 6 to seal the seam and knots I'm into my 3rd gallon of 105 West Systems epoxy is not the one you used
  12. Moparmyway

    Milled lumber project

    NICE compliment, thank you, it's actually 2 slabs joined together Treated the bottom to 3 coats, also treated all of the sides with a few coats as well
  13. Moparmyway

    Milled lumber project

    White oak, 2.5" thick when milled. Finished table is about 2" thick, 11 feet long, and averages over 50" wide 13 coats of West Systems epoxy More sanding & epoxy than I planned for, but was definitely worth it all in the end ! I'll get some pictures of the finished coat soon, this was the 12th...
  14. Moparmyway

    Has Anyone Seen

    I'm not into any drama stuff, more about trying to get this resolved once and for all I'll see about PM'ing you his address
  15. Moparmyway

    Has Anyone Seen

    Here is what I asked you Kenny, I'll go first, mk ? How does one abandon a saw that was mailed ? If I had someones saw at my house, and I didnt want it laying around, I'd just mail it back to them You KNOW that you can mail him his saw, so whats the real reason you say its abandoned ? Are you...
  16. Moparmyway

    How often do you check cylinder bolts?

    There is the problem. You can not get cylinder bolts tight enough with just a t27screwdriver
  17. Moparmyway

    Has Anyone Seen

    Kenny, I'll go first, mk ? How does one abandon a saw that was mailed ? If I had someones saw at my house, and I didnt want it laying around, I'd just mail it back to them You KNOW that you can mail him his saw, so whats the real reason you say its abandoned ? Are you waiting for $$ to ship it ?
  18. Moparmyway

    Want to Sell NIB MS462 arctic

    BUMP
  19. Moparmyway

    Sold NEW STIHL MS880 POWERHEAD FLUSH OR WRAP $1699 US$ TOTAL

    Friend of mine just got one from Dave here, sent directly to me for porting. I have purchased new from Dave as well I'd purchase another new saw from Dave without any hesitation whatsoever. BUMP
Back
Top