Search results

What is my starting setting on the idle speed screw?

How would I check flywheel? What exactly am I looking for? Like I said before, it has spark but maybe not at the right time??

Yes I was referring to the coil gap when I said gap set at .305mm. I checked compression tonight and after 3 pulls she was at 90, however, the threaded section of my tester was too long to be fully threaded to the shoulder and o ring seal. I had to make due with Teflon tape and partially run...

Spark blue, brand new plug not fouled, gap set with .305mm gauge. Magnet on flywheel appears to hit coil at TEC.

Not as wet as I would have thought it would be from pulling it 100 times. Even with dumping a little fuel right in there.

I did try dumping a little fuel (fresh) and still not go. It appears to have had straight fuel failure. New bearings and seals installed.

Didn't check compression yet, can't find my gauge.... Sealed bottom with hondabond, if your not familiar it's great gasket material resistant to oil and gas. Used supplied gasket in between spacer and jug.

So I picked up a basket case husqvarna 345 for $20 to use as a beginner learning experience. Put on a cheap 350 jug kit (yes china) and new carb. Fuel line shows fuel, plug has spark, but she won't fire up. Adjusted carb to factory workshop numbers. Impulse line appears ok, not pinched. There...

Since I don't have the primer set up it sounds like I should be using the C3-EL18B. Is there a difference between the C3-EL18B and the C3-EL18? If not, it has me curious since I found a C3-EL18 on the bay and the seller specifically wrote in their description that carb (C3-EL18) that it would...

So I bought a basket case husqvarna 345 and I decided to use it as a learning project. It had a walbro 159a with a stripped low side needle hole and I need to replace the whole carb. Since the 159a is not longer available I'm not sure which carb to use as there are 4 different options. I would...

Perfect, thank you!

So I'm trying to find a bar mount chart that not only lists dimensions but also which saws used that pattern. I've been on the chainsaw collectors corner and they have a great page of different mounts/patterns with pictures and dimensions but no specifics about what saw manufacturers and saw...

Interesting info. I talked to the neighbor this past weekend and they gave me permission to cut down anything hanging over the fence. They also gave me permission to drop the whole tree if I wanted to. It's an older couple and from what it sounded like to me, they are tired of constantly...

So I've got a new to me splitter, homemade, and it has a 4 way splitting wedge on it. I'm not a fan of the 4 way wedge because unless you have the perfect size log your splits end up pretty uneven. When I go to re-split the larger pieces I end up with a bunch of splits coming off the horizontal...

I'm not sure if you have ever used a 4 way wedge so I'm going to give you my opinion on them to maybe save you from spending money you dont need to. I recently bought a splitter that has a 4 way on it and even though its homemade its still the same theory as any 4 way splitter head and I...

Thanks for the info guys. Talked to my insurance guy and there is no clear definition when it comes to insurance coverage

Thanks for the advice guys. I definitely not interested in pissing off the neighbor so I'm going to tread lightly here after I get a little more info on how these things usually play out. Got a call into my insurance agent who covers my homeowners and auto so I should have those questions...

Hard to see the detail in the pics but about 1/4 of the tree is down in the neighbors yard (no chainsaw marks) and when I first looked at the house there weren't tree limbs in the neighbors yard and there also used to be an evergreen about 8' wide and 8' tall planted behind my truck that somehow...

So I just bought a house (bucks county, pa)and in the back corner of my property (where I would like to park my trailer) my neighbor has a tree over hanging the property line and this tree is ready to go. So I'm calling on help from the pros that deal with this daily and also the landowners that...

Update, stove working great thanks to proper maintenance and good advice from the thread contributors. I finally grew a set and started loading it up using the north south orientation using smaller fatter splits and playing around with the air intake and now have no problems burning at 400...