Search results

Can you upload pics of parts you have?

thats what I’m talking about!!! I would have done the same thing.

Word Accumulator should have been the word capillary

pg.15 https://www.miniplane-usa.com/pdf/WalbroServiceManual.pdf

Does that carb have a nozzle or accumulator? If it has a nozzle you need to pull meter diaphragm and High needle, next you need to take you finger and cover the little feed hole that lines up with high need on metering side and put a small piece of fuel line in high needle hole you should be...

Echo 2620

for the 4 mix engine

Sorry shim-feeler gauge.

Could

You would cut a feeler gauge to work

Gasket kit is cheaper around 3.99 come with brass washer, cork gasket and feeler gauge

Did you time the engine right? There is a mark on the flywheel, cam and area where cam goes

Also make sure crank isnt full of gas

I’ve work on 100s of the 4 mix engines Check valve adjustment. Orders you a valve cover gasket kit and it will come with special valve shin needed to do adjustment. Make sure the large hose going to carb is on the brass barb. on aftermarket carb for the 4 mix they suck!! Ones I used had an...

Or rolled over? Just a thought

Reset

Could the run time had rest from reaching to run time counter limit?

Need to get updated care bolts too

I had the sav a thread kit but after have to replaced 2 customers cylinder I got rid of that kit.

Last 461 I did