066

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. K

    064 - >066 hybrid air leak

    Alright here goes, As the title says I performed my 2nd 064 to 066 big bore conversion, not sure if that's relevant to this issue though.. After the swap I pressure/vac tested, found a leaking Flywheel side crank seal, replaced that. Then found a leak at the clutch side bearing seat in the...
  2. Overkill338

    Want to Sell Hyway PopUp Cylinder Kit for MS660

    I found two of the 066/660 54mm popup kits under my wife's desk if anyone is interested. $60 shipped?
  3. D

    Stihl 064, 066 HD air filter conversion kit available

    I have read elsewhere that the HD air filter conversion kits and HD filter base for Stihl 064 and early 066 were no longer available from Stihl. This kit is for the saws that came with a fleece or mesh-style filter. I just wanted to let everyone know that these are available still. At least in...
  4. quattro90

    Sold Stihl 066 MS660 1122 Cylinder

    FS: Stihl 066/MS660 1122 54mm cylinder "B" casting with decomp. Transfer was cleaned up but i found a few areas as seen in the pictures with pitting in the plating. I think it would make a great cylinder for a quick worksaw fix or port job experiments, or whatever else you think it can be used...
  5. SGaron

    Stihl 066/660 with an 056 Super piston?

    Hey everyone, I've been rebuilding a Stihl MS660 and I'm about to the part of getting a piston to throw in it (piston cracked from previous owner failing to buy a piston stop), and I started thinking about how I see other people transplanting pistons from huskys to stihls and vise versa, and it...
  6. L34

    6203 Bearing Chamfers

    Hi all at AS.Do off the shelf bearings have enough chamfer compared to OEM stihl? I know you guys use a lot of these (f/w side) on rebuilds. I thought I read a while ago that some people had locked cranks due to bearings not fitting against the radius correctly. Thanks in advance,Chris.
  7. quattro90

    Sold Stihl 064 Parts

    Just PM for additional details and pictures. All prices INCLUDE shipping to anywhere in the Continental US unless you are on the Left Coast (if you are on the Left Coast PM for shipping quote) I can only attach7x photos to start, but just ask I have plenty more. SOLD
  8. D

    Hutzl ms660 case problem

    Hi all, great site and its a pleasure to be a member. Im having a problem with the case of my clone ms660 from hutzl, the inset in the case for the chain tensioner spur gear measures 15.7mm in diameter and the actual spur gear itself measures 16mm so it in no way what so ever will fit, has...
  9. wash-climber

    Want to Buy Looking for a "big" saw. 80cc+

    Hey guys and gals, I'm looking for a bigger saw for falling larger trees, bucking, and milling. 80cc and up, or something 70cc+ that's modded Stihl, Husky, or McColluch would be preferred. I'm happy with older saws, so long as they are in good condition! My budget is $500, bar included would...
  10. huskyslinger

    Sold Stihl 066(revised price & details)

    So where to start, new meteor piston, carb kit, am dual port muffler, am clutch cover. Has new coil and light does work. Got saw in basket case. Runs and oils as it should. Will sell for $575.00 with new bar and chain. Chain will need sharpening. PHO $475. Plus half of shipping to lower 48...
  11. L34

    caber F.

    Hi all,has anyone found out how to tell the difference between F and non F rings?Received my 066 ones and specified non F. Either way i will use them.Just wanted to know if i got what i ordered? Cheers,Chris.
  12. L34

    Redeye cylindercylinder

    Hi all at AS,do you think this cylinder is salvageable? It is off an early red eye 066.Damage was caused by broken OEM circlip.Both sides scored near transfers but not all the way across.Can feel it with finger nail.Would it scotch brite out? Piston is toast.Running Chinaise AM at the moment but...
  13. thefarmboy21

    046 Magnum Air filter and tuning questions.

    Dad's 046 magnum has the original air filter (and everything else) that has never been changed, but he does clean it. Lately he said it's been losing power as he cuts with it. Says it's fine when he starts and then bogs down progressively. He decided he wanted me to put a new carb and filters in...
  14. C

    Want to Buy Stihl 066 felling dog

    I would like to buy the felling dog that matches Stihl 1122 664 0508 (opposite side). I think the part number is 1122 664 0503, but i'm not sure of that. I have the 0508 but i lost the other side. Thanks.
  15. ConservationNation

    066 Mag Trade Value

    I'm thinking about trading a few guns for an 066, how much do you think a saw like this would go for? He wants 900 TV for the saw, 24" bar, 36" bar, 4 24" chains and 3 36" chains. Is that fair?
  16. huskyslinger

    Want to Buy 066 decomp cylinder

    Like title says looking for decomp style cylinder. No broken fins please
  17. huskyslinger

    Sold Early 066 cylinder

    Looking for a good early non decomp cylinder. No broken fins
  18. huskyslinger

    Want to Buy 066 dual port

    Looking for a decent dual port cover/muffler for 064, 066.
  19. huskyslinger

    Want to Buy 066 cover

    Looking for a non decomp, flat top 066 cylinder cover? Shoot me a pic of what you got!
  20. AgainstTheGrain1

    Another New Member Wanting to Say Hello...and other stuff

    Hello wonderful and insightful members of Arboristsite! I have lurked around this site for a short while now and am only recently getting pretty serious about chainsaws. I have read a lot of great information on here from all of you and it has gotten me out of, or rather avoided, some...
Back
Top