262xp

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Tree Feller

    Sold Husqvarna 262xp

    I have a real nice 262xp I’m going to sell. Saw runs strong and starts easy. Comes with 20” bar and chain. I’m the second owner. Few small blemishes on the plastic. Good clutch, good compression and good spark. Just down sizing the herd. 385$ shipped to lower 48.
  2. Antiantivibe

    Blasphemy!

    I’ve honestly had more large bod Macs and Homelites than any other brand, although the old green saws are closing in. However today I caved to an orange Swede, a husky 262XP with the sought after walbro hda87 and factory 18” bar. Only thing to do now is decide on listing it or adding it to the...
  3. C

    How's This Piston Looking?

    Pulled this piston out of my 262 I rebuilt a year or so ago. To my untrained eye it doesn't look too bad apart from some carbon on the exhaust side. I'd appreciate some feedback on the condition, so that I can learn more about what I should be looking for aside from the obvious like scoring...
  4. P

    Want to Buy Husqvarna 262/257 clutch brake cover

    Want to buy clutch cover for Husqvarna 257/262.
  5. dirty

    Sold HUSQVARNA 262XP INCOMPLETE PROJECT

    Selling a Husqvarna 262XP incomplete project saw. It is missing it's muffler assembly and carb assembly. The piston and jug looks good to salvageable. The clutch cover / chain brake is in good working order. Asking $200 plus the ride.
  6. MAngelotti1

    HDA87 question

    Reviving a 262 for a friend. Early saw with HDA 87. Has newer Mahle cylinder on it now. The H and L screws are bent near the head and rub together. I have a 144 on the shelf and am wondering if I can use the screws from that in the 87? They look to be the same length. Any input? I capillary...
  7. Luuk Cornelissen

    Husqvarna 262xp

    Hello guys, i was so lucky today to get a 262xp in decent shape shipped over to me for only 90 euro's! And thats not all. The saw has no decomp and a HD 87 carb i tought these saws were the better models (correct me if im wrong). So the saw had just about 150psi compression, my question is want...
  8. G

    Sold Walbro HDA 120

    Used HDA 120. Runs fine, pulled from 262 XPG and replaced with an 87. $40 and shipping. Thanks. -Garrett
  9. John235

    Want to Buy 262xp cash in hand

    I’m looking for a 262xp chainsaw. With a KS cylinder and hda-87 carb. I know these are valuable and I’m prepared to pay good money for one in nice shape I’ve got a beat 261/262 conversion already so I’m looking for a mint one. Thanks.
  10. G

    Want to Buy 262 KS Jug

    Looking for the infamous KS jug... and hell why not, an HDA 87 carb. Who'se got my miracle? Thanks.
  11. Baconaman

    372xp xtorque handle on an older 372xp

    This is my first post and I'ms doing it on a phone so cut me some slack. I tried to search old posts for this but it was too clunky on the phone. I'm wondering if anyone has successfully used the full rap OEM handle for the 372xp x-torq on the pre x-torq 372xp successfully? Online some say it...
  12. BonScott46

    Husqvarna 262xp not starting

    So I started a thread many moons ago about this saw. Got it with a scored piston, tore it down and put in new seals, meteor piston, spark plug, fuel line, fuel filter and new gaskets. I have not vac/pressure tested it, I know I know... Figured I would try starting it without rebuilding the carb...
  13. BonScott46

    Ebay Husqvarna 262xp scored piston. Advice please.

    First post, been lurking for a few weeks and reading until my head hurts. Bought my first saw last week, a 1990? Husqvarna 262xp, from Sweden's version of Ebay. I saw that it had the plastic clutch cover and thought it was likely an early model possibly with the hda-87 carb, so I took a chance...
  14. V

    Want to Buy Husqvarna 288xp and 262xp cylinders NEEDED

    I am in need of cylinders for a Husky 288xp (54mm) and a 262xp (48mm) Looking for Oem with or without decompression. It just needs to be in usable condition Thanks!
Back
Top