dolmar

So I recently got an early 6401 ex HD parts saw and was intending on putting a BB kit on it for my chainsaw mill. Piston and cylinder were scored, and I expected it to have been run lean or without mix. I was moving the saw around on the bench and noticed that the flywheel had some lateral slop...

Hi guys, I am having an issue with a dolmar 5105 that I purchased from a gentleman on this site a couple years ago. Easy start, fully adjustable carb, 5100s muffler to keep heat down, a tach to check rpms. About 25 hours on it since I got it. Not much use in it before I got it. I have run...

I'm needing a mechanic that can actually work on my not too old Dolmar ps-510...preferably here in New Mexico but anywhere kinda close will do. I've taken it into the dealer (K&S in Albuquerque) and had a bad experience and did not get a working saw back and I've had a local guy that "knows...

Will a MAKITA DPC7300 cylinder kit for the concrete saws fit of a Dolmar/makita 6400 chain saw? Or is there something different a bout the jug??

Good afternoon I have a Makita DC9 330s (I believe its one of the first chainsaws Makita made) It does have the 45M6 engine but I'm looking to see if there is a Dolmar, or another chainsaw that I can use the parts from. I have been having a tough time finding this chainsaw specs and information...

So i drop started my 120si when it was cold and this happened...

I'm looking to get an Alaskan mill for my own personal puttering. I'd like to mill whatever I can find in the yard, or the family's yard into lumber. Right now, I don't forsee anything huge but I always like to keep my options open. Right now I can't see sawing anything bigger than 16" right...

After reading Mr. Marks post and learning a little bit about the Sachs injector carbs it got me wondering how exactly it works, does anyone have any literature or can break it down and explain it to me, that way if I ever need to make repairs on mine I know what going on internally.

I purchased a Dolmar 133 Super and I would like to get a Sprocket nosed bar worthy of its 85cc's. It uses the large mount Dolmar bar with the 14mm studs.

So I thought about buying a Saw yesterday and was going to spend a decent amount of money on it and decided it just wasn't for me, but it was going to be a last hurrah before having to cut back on my buying, so I decided to get something I really want, and that's a makita dcs7900, ported or...

Brand new in the box ps6800i. Make me an offer

Sachs Domar 109 I have rebuilt the carb made new intake and carb gaskets. cleaned the saw up and ran it for a day. i noticed it started running funny over reving and idling erratically. Brought it back to the house thinking one of the intake or carb gaskets failed but they didnt. saw must have...

I have a nice stock Dolmar 7900 for sale. I have put 3 tanks or so though it. Everything operates as it should. Has a few small marks in the plastic where the handle is under the top cover. Nothing much but wanted to point that out. Selling PHO, $650 plus shipping. PayPal friend and family or...

should i sell my trusty MMed 530 echo chainsaw to get a new maryann 51v / dolmar 5105 clone? or should i just keep the echo?? or just sell the echo and pocket the money for the important things in life like ammo and beer???

So I know it is a long shot as porters like to hord their numbers! But I was given a 120SI that is in really good shape. I have put new piston in and had to make a velocity stack for it, as finding an air filter was a pain. So anyway just hoping someone will chime in and give me some numbers to...

1st up. Efco MT3500. No known issues. Had her fired up this past summer. $100+shipping Efco 156 ported Idk the port work. Bought it like this. But I can tell you, ran much better than my John Deere cs56. Which is why I sold that saw. Sorry for bad picture. Was taken with group of saws and that...

Hi everyone Looking about I can get a Makita EA7900P45E for the right money. First off, are they the same as the Dolmar in all but colour or are they a cheaper spec and build quality or are they an off shoot that differs signivigently. Am wondering if anyone is using one or has any experience...

anyone out there running the dolmar/makita 5105 50cc saw? any issues with it -- hard starting? flooding or other weirdness?? anyone run this saw hard? stock of MMs are ok-- thanks--

S 11 for sale or trade,Saw has 120 pounds of compression, good spark,and will start with a prime and die.16 inch bar is in good condition and the chain has 50% left o it. I am always looking for Dolmar and Makita stuff,but open to all modern chain saw stuff.

1 as shown dolmar 119 p/h complete (TURNS OVER RUNS WHEN FUEL SPRAYED IN THE CARB ) sold as non-running ... missing bar cover 1 bar stud 2 bar nuts looking for $65 obo plus the ride......... prefer postal m/o p/m if interested