help the new guy

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. H

    Help! Echo cs-352

    I recently picked up on the cheap a cs352 for orchard work. Very little use on the saw. I think it has sat with ethanol gas in it for sometime. New gas, cleaned carb. It runs the same. In and out of 4 cycling while in wood. Can't tune it out. Pulled Carb limiters. I can't find a carb rebuild...
  2. L

    Oil confusion!

    As a newb, I’m insanely confused with all of the “oil” options out there. I have a Husky 440. As for fuel, I’ve been using a store bought pre-mix (I’m ordering Husky brand pre-mix just to be safe). I recently bought Husky brand bar and chain oil. HOWEVER, the small print on the back scared...
  3. U

    555 or 562XP Yes, I'm sorry, another one...

    555 Or 562XP Yes, I know this one is a dead horse but I have a few questions. I currently have a 435, which I pretty much destroyed cutting 9 cords of oak with. That was my first saw and I learned a lot of things, especially what not to do. I bought that saw knowing this and now I ready to...
  4. M

    371xp parts. HAAAAAAALP

    New guy here, here's my situation: I just bought a Husqvarna 371xp got a great deal at $240. The only problem is it's missing the chain brake and the screws that fastens it on. I was able to buy the chain brake on Amazon. But I'm having a hard time finding the screws. I know you folks are a...
  5. S

    Starting a small bundling business

    What's up guys I'm new to the whole firewood game I've been cutting down trees and splitting for a couple years now. I'm interested in getting into the firewood bundles part of business I'm currently making a bundler based on some pictures I saw on here. I have saws, splitters, wedges, axes and...
  6. J

    576 AT or 441 CM

    Ok I'm sure somewhere on here there is a thread covering this, actually I've found a few but they are all older. My next saw will be a jump to a "big saw" to me. I'll be running a 24" bar on either one and it will be used on occasion but will not be primary use saw. So AT or MT is a must, I...
Back
Top