husqvarna

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Lightning Performance

    Want to Buy Husky 394-5 parts

    AV spring system complete with screws if possible OEM only. Also looking for another 394 top cover busted or not to chop up. 394 air deflector behind the muffler. Or 3120 type 394 flywheel Flywheel dogs, springs and bolts. I have OEM air filter...
  2. nraws

    372xp leaking fuel when on it’s side

    I’m decent with saw maintenance, but before I tear this thing down… I regrettably had to get a loan on one of my saws at a pawn shop a couple months ago, and forgot to drain the gas before I left it there, I got it back today and it started fine, ran fine, but I got it home and had it laying on...
  3. MCushman

    Want to Buy 60cc Saw - Prefer Husq or Echo

    Hi! New to the forum and looking for a 55-60ish cc pro level saw that will be used mainly for firewood and land clearing. I’ve got my eye on a Husq 359, 357xp or a Echo 600, 620 but I’m open to ideas! Matt
  4. I

    Husqvarna 3120XP - Chain Locking Up

    Hello Chainsaw aficionados, I recently got a secondhand 3120XP in basically new condition with no bar and chain included. I've been working on procuring a bar and chain for ripping with an alaskan mill and I ended up with an Oregon 363RNDD009 bar (3/8", 0.063", 115DL) and an Archer ripping...
  5. I

    Help Identifying Chainsaw Bar

    Hi, I have a 24” and 36” bar that I received when buying a used 3120XP. I think both are Husqvarna (the 36” came in a Husqvarna cardboard sheath), but neither has a company logo or any naming on the bar itself. The 24” bar had a chain already on it, wrapped in plastic. I’d like to understand...
  6. Antiantivibe

    Blasphemy!

    I’ve honestly had more large bod Macs and Homelites than any other brand, although the old green saws are closing in. However today I caved to an orange Swede, a husky 262XP with the sought after walbro hda87 and factory 18” bar. Only thing to do now is decide on listing it or adding it to the...
  7. Huskyfan88

    Want to Sell Husqvarna 357xp

    Husqvarna 357xp for sale, id give it about a 8.5/9 out of 10. Used but lightly, all plastics still bright and shiney. Very clean saw for its age. Saw is located in NJ or I can ship in the continental usa for a fair price. $650
  8. Huskyfan88

    Want to Sell Husqvarna 262XP new never gassed

    Up for sale is my 1994 Husqvarna 262xp. Legendary saw put away for the last 27 years. Brand new, never gassed. condition. Still has the little plastic tag holder hanging on the saw. Saw is in NJ and I can ship in the continental usa for a fair price. $1100
  9. C

    Husqvarna timing advances

    So I've got a 365 x torq and a 266SE. I've done base gasket deletes and muffler mods on both, and opened up the transfer covers on the 365xt. I've had good luck with timing advances on other saws, simply filing off part of the flywheel key. But I can't find a lot of info on doing that with these...
  10. MAngelotti1

    Sold 2100cd intake block, found it

    Looking for a good intake block for a 2100cd
  11. JohnnyChainsaws

    Sold 2016 husqvarna 562xp new P&C kit installed recently

    2016 husqvarna 562xp with new P&C kit installed professionally at husqvarna dealer. Decompression button deleted. Saw had some scoring on exhaust side and would not staying running which is reason for replacement. Saw now starts and runs great and is ready for the woods! $600 shipped with 20”...
  12. JohnnyChainsaws

    Sold 2021 HUSQVARNA 395XP PHO

    Used 2021 Husqvarna 395xp Powerhead only - bar not included. Build date was december of 2020 - original purchaser bought in april of 2021. Customer decided unit was too big for him and traded it on a new 372xp. Was not used much at all. Starts and runs great. Located in ashland, va. Paypal...
  13. marcaddeo

    Chainsaw guide bar right on mounting bolts

    Hi all, I’ve recently bought a Redmax GZ7100 (I believe these are 372xp clones) powerhead. I also bought an Oregon 280RND176 guide bar to put on it. However I’m questioning the fitment of this guide bar. Before purchasing it I reached out to the support on Redmax/Husqvarna and they said a D176...
  14. N

    Longevity of modern 90cc class saws

    Hello! I'm new to the forum (as a member), but I've benefitted by reading many of the discussions found on this website. I'm thankful you all have been so helpful to others in wrestling with saw decisions and giving them advice. Great group it seems. I'm asking what I hope can be an unbiased...
  15. BothBarrels

    Want to Buy Husky 50 parts

    Ive got a 1984/1989 hybrid project Husqvarna 50 that I'm gonna run this fall. Over winter I plan to do the 55 style top end conversion. Parts I need are: *55 top cover *50 or 55 flywheel cover *Muffler (have one, but she's a little loose internally) *OEM clutch cover/chain brake *tank handle...
  16. R

    Want to Trade Cilindro Husqvarna

    Bia tarde. Poderia alguém me informar a utilidade de está tampa sobre canal de transferência? Obrigado
  17. BothBarrels

    Sold 266se/xp

    Looking for any year Husky 266 powerhead. I'm not scared of a project saw although it would be nice to not need to do bearings. Let's see what's out there
  18. Tree Feller

    Husqvarna 262xp

    So I just bout this single owner 262xp. Super nice 91 model. So a couple of things. 1- it’s missing a muffler bracket bolt and is leaking bar oil out of it. Not sure it’s the threads are shot? If so can I just drill it out and tap it to a 6mm rather than 5mm. Or do I need a helecoil? 2-...
  19. J

    1999 Husqvarna 55 - rebuild it or not

    Hi Folks, I just joined this site and have found a wealth of info on my Husqvarna 55 in these forum threads. I'm a bit of a newbie at rebuilding a chainsaw but have experience with auto mechanics and I love fixing things so it all makes sense, to some degree. My Husqvarna 55 project was a non...
  20. J D

    Calling all Autotune guru's

    So recently l have been trying to get a better understanding of the technical side of autotune... I've been quite surprised by how little information is out there, especially from Husqvarna themselves. Types of things I'm curious about include; What revisions are there & what changes do the...
Back
Top