husqvarna

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. big hank

    Sold 346xp NE PHO price reduced

    Howdy folks! Putting up for sale my husky 346xp new edition. The saw runs and cuts perfectly, it needs nothing and would be ready for a day in the woods tomorrow. It has great compression. Made in Sweden Would be a great firewood or limbing saw! $375+shipping Thanks for looking!
  2. T

    28" TsuMura bar/driver question

    Anybody running the Husky Large mount 28" - 3/8 - .050 TsuMura bar with Oregon EXJ chain? My current 28" bars take 93 drive links and the TsuMura is listed at 92? Just want to make sure I order the correct loop to match the bar im ordering and the 92 drivers threw me off a bit...
  3. T

    X-Cut Skip Tooth?

    What are the chances we ever see the Husqvarna X-Cut chain come out in Skip-tooth? I have come to really like the standard X-Cut chain and was kind of bummed when I just went to order some new Skip tooth chain and realized that they don't make an X-Cut skip tooth version.
  4. Cobus

    Want to Buy Metal brake handle 288xp

    I know it’s probably a long shot but I had a 288xp handed down to me and it’s missing the brake handle, just trying to get it back to original as possible.
  5. P

    Brand New husky rancher 450 dying

    I just recently bought a Husqvarna rancher 450, and started using it about a week ago. It started fine, ran fine, no problems. When I put it down to adjust a tree I turned it off, and when I picked it back up again I started having the problem. It would start fine and run fine after picking it...
  6. DavesSmallEngines

    Want to Sell Husqvarna Techlite 20” + 28” bars

    Hi Folks! Dave from Dave’s Small Engines on YouTube here. I’m apprenticing with Donyboy73 the Small Engine Doctor on YouTube. You may have seen or heard of him. Anyway, I have been a long time lurker under a different account, since 2010 actually. Love the site and the info. Recently, I...
  7. D

    Jonsered 2065 full wrap handle

    Just picked up a non running Jonsered 2065. I want to put a full wrap handle on it but cannot find any. have heard that a Husqvarna 365 which i can find easy will work but will need some modifications. want to know what those are and how difficult it is to do. also if after the modifications it...
  8. R

    Looking for parts that don't exist

    I got an old Husky 162 SE and I only have one problem with it, the fuel tank cap is the old style with a rubber check valve in it that lets air in but keeps the fuel from dribbling out. Well, the rubber seal is broken and so I need a new cap, unfortunately the vented caps don't exist any more...
  9. NewEngland ChainSaw Works

    Sold Husqvrana 262 ported and polished

    Hello am selling a very nice Husqvarna 262xp saw. I got this saw in a trade. So, the story was it was the grand dad's saw and sat on self... blah... blah...blah... yadda yadda yadda . Needless to say the saw needed a piston :dumb2:. So this saw was completely taken down scrubbed doctor clean...
  10. huskyslinger

    Sold More ****! Stihl parts sold pending!

    So if see something that tickles your fancy let me know.
  11. huskyslinger

    Sold 394XP tanks sale pending on lot

    Just putting this out there to see if anyone would be interested and will post pics if there is. 20 for piston, 35 for carb, 15 each for tanks. Cranks sold
  12. C

    replacing top end of husky 281Xp

    so i bought a used 281xp to do some milling. after cutting a few slabs it wasnt runing right seemed ajusted so i started ripping it apart to see what was up. i fount the oil pump ajustment was sheared off unrelated to my issues with it running but am replacing the pump. i took the top end apart...
  13. Y

    HUSQVARNA 455 Rancher No Start-Baby Dead

    Newby and thanks for allowing me to join. I have a 455 Rancher that I was using and just as I finished cutting thru log it died and will not start. I have checked for spark it's good, new plug and flywheel key is good, checked gap for coil seems fine, poured gas in spark hole and still nothing...
  14. Y

    HUSQVARNA 455 Rancher No Start-Baby Dead

    Newby and thanks for allowing me to join. I have a 455 Rancher that I was using and just as I finished cutting thru log it died and will not start. I have checked for spark it's good, new plug and flywheel key is good, checked gap for coil seems fine, poured gas in spark hole and still nothing...
  15. MAngelotti1

    Sold 394xp parts found !!

    Looking for a decent Husqvarna 394 starter/recoil cover. In working order preferred. Rope condition not crucial.
  16. P

    Husqvarna 242xpg acting wierd.?

    I recently rebuilt a 242xpg. It was not splitted. Only cylinder/piston inspection, and new gaskets. Its in great shape. At first startup it was acting like it has a vacuum leak. After firing It started idling higher and higher, and it would die when i used the throttle too much. Turning the...
  17. S

    Husqvarna 455 Rancher woes. Won't start, smokes a lot.

    So my buddy smoked this saw originally by running straight gas in it (like a dummy) and blew up the crank bearings and part of the bottom of the piston. He got a quote for a repair and which made him *pucker*, so then he just gave it to me because I love tearing things apart. So I pulled it...
  18. Artemis

    First Port Job - Husqvarna 365 Build

    Hey guys, it's been a while since I've posted here, but I'm back! I've acquired a 1997 365xp from my In-laws for $200. It's in rough shape but I thought it's the perfect saw to finally experiment on and do a full port job. I'm hoping some of you more experienced porters can chime in and give...
  19. Paul Silvestri

    Sold Husqvarna 372XP OE (DUCE) built

    Very nice 372xp oe @Duce built saw with maybe 2 tanks run on it. Got it in April and have since added brand new oem low top cover and oem side cover. two sets of felling spikes as well. large and standard size. large are oem and standard are aftermarket. Price is $500 plus shipping, Shipping...
  20. N

    Tuning a new husky help!

    Hey fellas, I opened up my new 445e muffler a little bit (drilled Two 1/4 inch holes and removed spark arrestor) I have the tool to adjust the carb. I believe I have it four stroking and it cleans up well in the cut. After a few hard hours the plug looks pretty lean, if I back the H screw out...
Back
Top